Tailored Warranty And Support

Financing Available Today

Powder

Check out our powder-metal 3D printers — the go-to machines when you need to print dense, high-performance metal parts straight from powder. These systems unlock the ability to turn bold, complex designs into functional components with superb strength and fidelity. Choose powder-metal printing and let your most ambitious ideas take shape in true metal, not just dreams.

17 products

Showing 1–8 of 17 Powder

3D Lab, AO Metal, Microtrac, Verder Scientific · Ultrasonic atomization, Metal LPBF

AO Metal A100 + ATO Noble + CAMSIZER X2+: Jewelry Bundle

Make your own gold and silver powder, measure it, and print it — one closed loop from one supplier. The ATO Noble atomises gold, silver, platinum and palladium under argon with Zero Loss recovery, so karat and chemistry survive the process. The CAMSIZER X2+ measures particle size and shape. The AO Metal A100 prints with every laser parameter open. Configured to order; lead time on request. Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Get quote

Made to order

· Lead time on request

3D Lab, AO Metal, Microtrac, Verder Scientific · Ultrasonic atomization, Metal LPBF

AO Metal A50 + ATO Lab + CAMSIZER X2+: R&D Bundle

Turn a new alloy into a printed part without leaving the lab. The ATO Lab atomises your own feedstock into spherical powder, the CAMSIZER X2+ measures its size and shape, and the AO Metal A50 prints it with every laser parameter open — no cartridges, no annual licence. Configured to order; lead time on request. Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Get quote

Made to order

· Lead time on request

Farsoon Technologies · Metal LPBF

Farsoon FS1311M-U LPBF Metal 3D Printer – 16-Laser Large-Format | 1310×1310×1650 mm

The Farsoon FS1311M-U is a large-format LPBF metal 3D printer for high-throughput production — a 1310 × 1310 × 1650 mm build with sixteen 500 W or 1000 W fiber lasers, reaching up to 1,440 cm³/h in Ti-6Al-4V.

✓ 1310 × 1310 × 1650 mm build · 16 × 500/1000 W fiber lasers
✓ Up to 1,440 cm³/h in Ti-6Al-4V · titanium & nickel superalloys
✓ Lead time: configured to order — US install, training and support

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 1310×1310×1650 mm, 51.6×51.6×65 in

Prints 316L, AlSi10Mg, HX, IN718, Maraging Steel Grade 300, TA15, Ti-6Al-4V

Get quote

Made to order

· Request a build slot

Farsoon Technologies · Metal LPBF

Farsoon FS1521M LPBF Metal 3D Printer – 16–32 Laser Large-Format Production | 1530×1530×1650 mm

The Farsoon FS1521M is a metre-scale LPBF metal 3D printer for serial production — a 1530 × 1530 mm platform with 16 × 500 W fiber lasers as standard, scaling to as many as 32 lasers and an 1650 mm Z-height (3,862 L) on the FS1521M-U.

✓ Metre-scale 1530 × 1530 mm platform · up to 32 × 500 W fiber lasers
✓ Titanium, nickel superalloy, stainless and aluminium alloys
✓ Lead time: configured to order — US install, training and support

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 60.2×60.2×65 in, FS1521M-U: 1530×1530×1650 mm (3,862 L), FS1521M: 1530×1530×850 mm

Prints 316L, AlSi10Mg, HX, IN718, Maraging Steel Grade 300, TA15, Ti-6Al-4V

Get quote

Made to order

· Request a build slot

Farsoon Technologies · Metal LPBF

Farsoon FS812M-U LPBF Metal 3D Printer – Compact-Footprint Large-Format | 810×810×1700 mm

The Farsoon FS812M-U is a tall large-format LPBF metal 3D printer with a compact footprint — an 810 × 810 × 1700 mm build with eight to ten fiber lasers (500 W or 1000 W), in a frame with 41% less floor space than the prior generation.

✓ 810 × 810 × 1700 mm build · 8–10 fiber lasers · 41% smaller footprint
✓ Titanium & nickel superalloys · multi-layer gas flow field
✓ Lead time: configured to order — US install, training and support

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 31.9×31.9×66.9 in, 810×810×1700 mm

Prints 316L, AlSi10Mg, HX, IN718, Maraging Steel Grade 300, TA15, Ti-6Al-4V

Get quote

Made to order

· Request a build slot

Farsoon Technologies · Metal LPBF

Farsoon FS121M LPBF Metal 3D Printer – Compact Frame for Dental and R&D | 4.7×4.7×3.9 in / 120×120×100 mm

The Farsoon FS121M is a metal LPBF 3D printer with a 4.7×4.7×3.9 in / 120×120×100 mm build envelope, running a single 300 W or 500 W fiber laser with a dynamic focusing system.

✓ 4.7×4.7×3.9 in — build cylinder
✓ 4.7×4.7×3.9 in / 120×120×100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 120×120×100 mm (4.7×4.7×3.9 in)

Prints 17-4PH, 316L, AlSi10Mg, CoCrMoW, Cu, CuSn10, HX, Ti-6Al-4V, 18Ni300, CoCrMo

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS191M LPBF Metal 3D Printer – Cylindrical Build with Heated Plate | ø7.5×7.8 in / ø191×199 mm

The Farsoon FS191M is a metal LPBF 3D printer with a ø7.5×7.8 in / ø191×199 mm build envelope, running a single 500 W fiber laser.

✓ ø7.5×7.8 in — build cylinder
✓ ø7.5×7.8 in / ø191×199 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build ø191×199 mm (ø7.5×7.8 in)

Prints 316L, AlSi10Mg, Ti-6Al-4V

Get quote

Made to order

· Built to order

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Fab DED Metal 3D Printer – 5-Axis DMT Production | 800×1000×700 mm

The InssTek MX-Fab is an all-in-one 5-axis DED metal 3D printer with a 31×39×28 in / 800×1000×700 mm work envelope — a 1,000 W (up to 2,000 W) ytterbium fiber laser, DMT closed-loop melt-pool control, and up to six powder feeders for multi-material and functionally graded parts.

✔ 5-axis DED with real-time DMT melt-pool feedback — dense, near-net-shape metal
✔ 30+ qualified alloys: Ti, Ni superalloys, stainless & tool steel, CoCr, Cu — multi-material in one build
✔ Fabrication, cladding, and repair on one platform
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 31.5×39.4×27.6 in / 800×1000×700 mm

Prints Cobalt alloys, Copper alloys, Nickel superalloys, Stainless & tool steels, Titanium

Get quote

Made to order

· Quote on request

Have a CAD? Have a quote in 24h.

Upload your file or talk to an engineer — no obligation, no spam, NDA standard. First-time customers get free DfAM review.