In stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
CreatBot Ultra PA CF - Carbon Fiber Nylon Filament - 1kg
Carbon-fiber-reinforced high-temperature nylon filament for FDM 3D printing — the strongest, stiffest, most heat-resistant material in the CreatBot range (125 MPa tensile, 8512 MPa flexural modulus, 188°C glass transition), for demanding structural and end-use parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
$100
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
Why engineers choose CreatBot Ultra PA CF Filament
Four things engineers check before standardizing on a carbon-fiber nylon.
Top-tier strength & stiffness
125 MPa tensile strength and an 8512 MPa flexural modulus — the stiffest, strongest filament we stock, for parts that replace machined plastic or light metal brackets.
188°C glass transition
A 188°C glass transition and 113°C heat-deflection temperature keep parts rigid and dimensionally stable in hot service — well beyond nylon, PC, or unfilled grades.
±0.02mm diameter tolerance
Tight, consistent diameter means steady extrusion — no mid-print under-extrusion from a loose spot or clogs from a tight one.
High stiffness-to-weight
Carbon fiber adds rigidity without weight — strong for drones, robotics, and motorsport parts where every gram counts. Carbon fiber is abrasive; run a hardened steel nozzle.
How we ship it
Every spool of CreatBot Ultra PA CF Filament leaves Gardena, CA the same way.
Print profile confirmed
Nozzle and bed temperatures verified on a CreatBot F430 before the spool is listed — not copied from a generic spec sheet.
Sealed with desiccant
Vacuum-bagged with the original desiccant pack — critical for carbon-fiber nylon, which absorbs moisture readily.
Ships from L.A. stock
In stock at our Gardena facility — 1–2 business day dispatch, datasheet included in the box.
Print compatibility
Requires an FDM/FFF printer with a nozzle rated to 300°C, a hardened steel nozzle (carbon fiber is abrasive to brass), and ideally an enclosure for the best layer strength. Nylon is strongly hygroscopic — dry the spool before printing. Full mechanical and thermal property values (tested to ISO 527, ISO 178, ISO 75, and ISO 1183) are listed in the Specifications tab below.
Recommended print settings
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 290°C – 310°C |
| Build plate temperature | 70°C – 90°C |
| Chamber / enclosure | Recommended |
| Print speed | 40 – 45 mm/s |
| Cooling fan | Off or low |
| Nozzle type | Hardened steel (required — abrasive) |
Typical applications
Where engineering and production teams run CreatBot Ultra PA CF Filament.
Storage & handling
Store CreatBot Ultra PA CF Filament sealed with the desiccant, and dry it before every print — carbon-fiber nylon absorbs moisture readily and prints rough and weak when wet. Use a dry box during printing, especially in humid environments.
Not sure Ultra PA CF is the right fit?
Three reasons teams pick a different CreatBot filament — tap the closest match.
Need glass fiber (less brittle, cheaper)CreatBot Ultra PA GF FilamentView filament →
Need lower-temperature stiffnessCreatBot PET CF FilamentView filament →
Why source through Additive Plus
- Validated print profile — nozzle and bed temperatures confirmed on a CreatBot F430, not copied from a generic spec sheet.
- In-stock at our Gardena, CA facility — ships in 1–2 business days, datasheet in every box.
- A materials engineer on the line for drying, nozzle-wear, or compatibility questions — sub-4h reply, NDA standard.
- Custom variants on request — specialty composite nylon grades qualified for your application.
| Brand | CreatBot |
| Printing Materials | Plastic Filaments |
| Solid Density g/cm3 | 1.15 |
| Tensile Strength | 125 |
| Tensile Modulus (MPa) | 7808 |
| Flexural Strength (MPA) | 192 |
| Flexural Modulus (MPa) | 8512 |
| Deflection Temperature | 113 |
| Glass Transition Temperature | 188 |
| Printer | CreatBot F430 |
| Nozzle Temperature | 300°C |
| Bed Temperature | 80°C |
| Printing Speed | 40mm/s, 45mm/s |
| Infill | 100%，+/- 45° |
| Nozzle size | 0.4mm |
| Layer thickness | 0.2mm |
| Plastic Class | Engineering |
| Reinforcement | Carbon fiber |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We source and qualify. Custom variants on request.
Need a filled, flame-retardant, or color-matched filament, or a profile for a printer we don't list yet? Our materials team qualifies the spool and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside CreatBot Ultra PA CF - Carbon Fiber Nylon Filament - 1kg
- ✔ High toughness and wear resistance with a striking black finish
- ✔ Print → debind → sinter to dense ceramic on a standard FFF printer
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
Tough. Fast. Heat-stable. Nexa3D x45 Black is a functional photopolymer for prototypes and production models that have to survive handling, assembly and test — 95 MPa flexural strength, 20 J/m notched Izod and a 120 °C heat-deflection temperature, with a draft mode that pushes build rates past 15 cm/hr. The deep black finish needs little cosmetic work.
5 kg bulk bottle. Currently on backorder — contact us for the current lead time.
Made to order
· On backorder — contact us for the current lead time
Print titanium parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, high-strength, lightweight metal.
- ✔ Rp0.2 844 MPa, Rm 940 MPa at 4.33 g/cc after sintering — tested to ASTM E8/E8M
- ✔ Debind and sinter parameters plus the full datasheet included with every spool
- ✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review
In stock
· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.
- ✓ Weather- and UV-stable — holds color, gloss, and strength outdoors
- ✓ Ships dry with a lot datasheet + drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Flexible. Cleared. Comfortable in the mouth. KeySplint Soft prints resilient nightguards, bite planes, splints and repositioners on the Nexa3D XiP desktop printer — FDA 510(k)-cleared and Class IIa biocompatible, with 110% elongation at break so appliances absorb clenching load instead of cracking. Polishes to a clear, patient-ready finish.
Choose your shade: Light Violet or Translucent. 1 kg bottle tuned for XiP, validated print and post-cure profile included.
In stock
· In stock — ships in 1–2 business days
High-temp. Corrosion-proof. Non-magnetic. Genuine Carpenter PowderRange® 625 (Inconel® 625) nickel superalloy for LPBF, EBM & DED metal 3D printing.
- ✓ Strength & corrosion resistance to 2000°F (1093°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on every lot · in US stock, ready to ship
In stock
· In US stock · ready to ship
- ✔ Specialty technical ceramic produced on an everyday FFF machine
- ✔ Print → debind → sinter to dense ceramic, no powder system required
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
Semi-flex matte black resin (HDT60): no post-cure needed for impact-resistant jigs & fixtures
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.Place your order, or talk to an engineer first
Order CreatBot Ultra PA CF - Carbon Fiber Nylon Filament - 1kg direct, or talk to materials engineer