Which metal powders are validated for the Farsoon FS121M?

The Farsoon FS121M is compatible with a broad range of validated metal powders, including stainless steels like 316L, tool steels, maraging steels, Inconel 718, titanium alloys such as Ti-6Al-4V, and cobalt-chrome materials. Validation ensures reliable printing performance and mechanical integrity of the final parts. Specific powder validation can depend on the supplier and application, so it’s recommended to confirm the exact material requirements before production.

What is the typical price range and lead time for Farsoon industrial systems?

Farsoon industrial 3D printing systems vary in cost depending on model size, configuration, and included automation features. Entry-level systems typically start in the lower mid-six-figure range, while large-format or multi-laser setups can reach the high six-figure to low seven-figure range. Lead times usually range from several weeks to a few months, depending on system configuration, production schedule, and installation requirements. For an accurate estimate, it’s best to request a detailed quotation based on your application needs.

What facility, ventilation, and safety requirements are needed for installing a Farsoon FS273M?

Installing a Farsoon FS273M requires a well-prepared facility with stable flooring, appropriate electrical supply, and adequate ventilation. The environment should support safe handling of metal powders, including inert gas systems and industrial filtration for air and fume control. Operators must follow safety protocols such as using personal protective equipment, implementing fire prevention measures, and ensuring compliance with local safety regulations. It’s recommended to conduct a facility assessment before installation to ensure all requirements are met.

Where can I get authorized Farsoon service and spare parts in the US?

Authorized service and spare parts for Farsoon 3D printers are available through Farsoon’s official US distribution and service network. Customers can contact certified partners or regional offices for maintenance, spare components, and technical support. Working with authorized providers ensures that parts are genuine and service technicians are trained according to Farsoon’s standards, maintaining system reliability and warranty coverage.

What is Farsoon Technologies known for?

Farsoon delivers industrial-grade SLS and Metal LPBF 3D printers for high-precision, high-productivity additive manufacturing, available through Additive Plus in Los Angeles.

Which industries use Farsoon 3D printers?

Industries include aerospace, automotive, medical, engineering, manufacturing, research, and education, with support available from Additive Plus in Los Angeles.

What materials can I print with Farsoon systems?

Farsoon printers support nylon, PEEK, and high-performance metal alloys for prototypes and end-use parts, all supplied by Additive Plus in Los Angeles.

What printing technologies does Farsoon use?

Farsoon utilizes SLS (Selective Laser Sintering) and Metal LPBF (Laser Powder Bed Fusion) with Flight® and dual-laser options, available through Additive Plus in Los Angeles.

Can Farsoon printers handle complex geometries?

Yes — Farsoon systems can print intricate, highly detailed parts suitable for functional testing and production, supported locally by Additive Plus in Los Angeles.

Are Farsoon 3D printers suitable for prototyping?

Absolutely — they enable rapid, high-precision prototyping for industrial and research applications, with guidance from Additive Plus in Los Angeles.

Can Farsoon printers be used for small-batch production?

Yes — they are ideal for low-volume production of functional and end-use parts, with local support from Additive Plus in Los Angeles.

How accurate are Farsoon 3D printers?

Farsoon systems deliver high precision, repeatability, and reliable results across multiple prints, backed by Additive Plus in Los Angeles.

Do Farsoon printers offer multi-material options?

Yes — depending on the system, Farsoon printers support experimentation with various polymers and metals, with advice from Additive Plus in Los Angeles.

Are Farsoon 3D printers energy-efficient?

Yes — systems are designed to minimize energy consumption and material waste while maintaining industrial performance, available locally through Additive Plus in Los Angeles.

Can I purchase Farsoon 3D printers in Los Angeles?

Yes — Farsoon printers are available for purchase through Additive Plus in Los Angeles, including consultation, installation, and local support.

What support does Additive Plus provide after purchase?

Additive Plus in Los Angeles offers training, installation, maintenance, and ongoing technical support for all Farsoon systems.

Can Farsoon printers integrate into existing workflows?

Yes — they are compatible with standard CAD software and post-processing tools, with integration support from Additive Plus in Los Angeles.

How fast can Farsoon printers produce parts?

Flight® and dual-laser technology allow faster build speeds while maintaining high accuracy, with optimization support from Additive Plus in Los Angeles.

Are Farsoon printers suitable for educational or research labs?

Yes — they are perfect for universities, research labs, and R&D centers, with local guidance available from Additive Plus in Los Angeles.

Can Farsoon printers produce end-use metal parts?

Yes — Metal LPBF systems produce high-quality, functional parts suitable for industrial applications, with consultation through Additive Plus in Los Angeles.

How reliable are Farsoon printers for continuous operation?

Farsoon systems are industrial-grade, designed for consistent performance with minimal downtime, supported by Additive Plus in Los Angeles.

18. Do Farsoon printers support post-processing workflows

Yes — Additive Plus in Los Angeles provides guidance and solutions for post-processing to achieve optimal part quality.

19. How do I choose the right Farsoon system?

Additive Plus in Los Angeles experts can assess your materials, part size, production volume, and application needs to recommend the ideal Farsoon printer.

20. How can I get started with Farsoon printers at Additive Plus?

Contact Additive Plus in Los Angeles via phone, email, or website to discuss your project, request a quote, or schedule a consultation.

What types of Farsoon 3D printers does Additive Plus offer in Los Angeles?

Additive Plus in Los Angeles offers Farsoon SLS 3D printers for polymers such as nylon, PEEK, and TPU, as well as Metal LPBF 3D printers for high-performance metal alloys including stainless steel, titanium, and Inconel.

What is the Farsoon 252P Series used for?

The Farsoon 252P Series, available through Additive Plus in Los Angeles, is an industry-leading SLS 3D printer for polymers like FS3201PA-F, FS3300PA-F, FS3401GB-F, and LUVOSINT® TPU, ideal for high-temperature and material development applications.

What is the build volume of the Farsoon 252P Series?

The build volume for the Farsoon 252P Series is 9.8 x 9.8 x 12.6 inches (250 x 250 x 320 mm), perfect for labs and R&D facilities in Los Angeles.

Which Farsoon printers are suitable for TPU and high-performance polymers?

Farsoon SLS printers such as the 252P Series, 403P Series, and eForm are ideal for TPU, FS3201PA-F, FS3300PA-F, and other high-performance polymer materials. Additive Plus provides these systems in Los Angeles.

Can Farsoon SLS printers handle large-scale production?

Yes, Farsoon offers large-format SLS printers with Flight® dual-laser technology, enabling industrial-scale polymer production. Additive Plus supports these systems in Los Angeles for prototyping and end-use part manufacturing.

What is Farsoon Flight® technology?

Flight® technology by Farsoon allows dual-laser SLS printing for faster processing, high productivity, and precise control over material parameters. Available via Additive Plus in Los Angeles.

What metals can the Farsoon Metal LPBF printers print?

Farsoon Metal LPBF printers support stainless steel, titanium alloys (Ti6Al4V, Ti64), aluminum alloys (AlSi10Mg, AlSi7Mg), Inconel 625 & 718, cobalt-chrome, and other high-performance metals. Additive Plus in Los Angeles provides full material support and guidance.

Which Farsoon Metal LPBF printers are suitable for small-scale production?

Compact systems like Farsoon FS121M, FS191M, and FS273M offered by Additive Plus in Los Angeles are perfect for R&D, education, and small-scale production of precision metal parts.

What is the build volume of Farsoon FS200M-2?

The FS200M-2 has a build volume of 16.7 x 9.1 x 11.8 inches (425 x 230 x 300 mm) and features dual 500W lasers for medium to high series metal production. Additive Plus offers this in Los Angeles.

Are Farsoon printers suitable for educational institutions?

Yes, both SLS and Metal LPBF Farsoon printers are ideal for universities and research centers in Los Angeles, offering hands-on additive manufacturing training and precision prototyping.

What is the Farsoon FS350M-4 used for?

The FS350M-4 is a highly productive Metal LPBF printer for serial additive manufacturing, capable of processing stainless steel, aluminum, titanium, maraging steel, and other alloys. Additive Plus supplies this system in Los Angeles.

Can Farsoon printers produce aerospace-grade parts?

Yes, Farsoon Metal LPBF printers can produce aerospace-grade components using titanium and Inconel alloys. Additive Plus ensures proper setup and material handling in Los Angeles.

Which polymers are compatible with Farsoon SLS printers?

Compatible polymers include FS3201PA-F, FS3300PA-F, FS3401GB-F, FS3150CF, FS3250MF, LUVOSINT® TPU, Ultrasint® PA6, PP nat 01, and more. Additive Plus in Los Angeles provides guidance for optimal material use.

Do Farsoon printers allow full control over printing parameters?

Yes, both SLS and Metal LPBF Farsoon systems offer complete control over temperature, laser power, scan speed, and material flow, allowing precise additive manufacturing through Additive Plus in Los Angeles.

Are Farsoon printers energy-efficient?

Yes, Farsoon designs its systems for efficient power consumption while maintaining high productivity, available for labs and production facilities in Los Angeles via Additive Plus.

Can Farsoon printers switch between materials quickly?

Yes, SLS and Metal LPBF printers allow for rapid material changes, reducing downtime and increasing workflow efficiency. Additive Plus in Los Angeles supports setup and maintenance.

Are Farsoon printers compatible with high-temperature polymers?

Yes, Farsoon Flight® 252P and 403P Series printers support high-temperature polymers such as PEEK and LUVOSINT® TPU for industrial additive manufacturing applications in Los Angeles.

Can Farsoon Metal LPBF printers produce medical implants?

Yes, Additive Plus’s Farsoon Metal LPBF printers can produce biocompatible implants using titanium and nickel-titanium alloys for healthcare applications in Los Angeles.

What industries use Farsoon printers?

Industries such as aerospace, medical, automotive, industrial manufacturing, research, and education use Farsoon printers supplied by Additive Plus in Los Angeles.

What is the Farsoon FS422M CAMS System used for?

The FS422M CAMS is a medium-large Metal LPBF system for continuous industrial production, capable of handling multiple alloys, with support provided by Additive Plus in Los Angeles.

Are Farsoon printers suitable for prototyping and small-batch production?

Yes, Farsoon SLS and Metal LPBF systems handle both prototyping and small-batch industrial production with high precision, available through Additive Plus in Los Angeles.

Do Farsoon printers require specialized facilities?

Farsoon printers are compact and robust, requiring standard lab setups without specialized facilities. Additive Plus provides installation guidance in Los Angeles.

How fast can Farsoon printers produce parts?

With dual-laser technology and optimized SLS/Metal LPBF systems, Farsoon printers achieve high throughput, helping Los Angeles manufacturers improve productivity through Additive Plus.

Does Additive Plus provide support and training for Farsoon printers?

Yes, Additive Plus offers expert training, installation, and support for all Farsoon 3D printers in Los Angeles, ensuring optimal use and productivity.

Can Farsoon printers produce complex geometries and detailed parts?

Yes, Farsoon SLS and Metal LPBF printers are capable of intricate designs, fine details, and complex geometries for industrial and R&D applications, supported by Additive Plus in Los Angeles.

Why choose Additive Plus for Farsoon printers in Los Angeles?

Additive Plus provides access to the full Farsoon product line, expert consultation, installation support, and ongoing service in Los Angeles for industrial-grade additive manufacturing solutions.

Are Farsoon printers reliable for continuous production?

Yes, industrial-grade Farsoon SLS and Metal LPBF printers are built for high reliability and continuous operation. Additive Plus ensures maintenance and workflow support in Los Angeles.

Farsoon Industrial SLS & Metal LPBF 3D Printers

Farsoon Technologies

Farsoon delivers industrial-grade SLS and Metal LPBF 3D printers built for power, precision, and productivity. From nylon and PEEK to high-performance metal alloys, Farsoon systems let you print stronger, faster, and smarter — with full control over materials and parameters.

Choose from compact lab systems to large-scale production machines powered by Flight® and dual-laser technology. Whether you’re building prototypes or manufacturing end-use parts, order your Farsoon 3D printer today and experience true industrial freedom in additive manufacturing.

21 products

Showing 9–16 of 21

Farsoon Technologies · SLS

Farsoon Flight® 403P SLS 3D Printer – Fiber-Laser High-Performance Polymer | 400×400×450 mm

Fiber-laser SLS system: a 500 W fiber laser with dynamic optics drives build rates up to 6 L/h with a fine ~100 µm contour spot, on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for high-performance polymers and demanding production, with fully open parameters. Sold, installed and supported in the US by Additive Plus.

500 W fiber laser — up to 6 L/h, ~100 µm contour for crisp features.
High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
Lead time: configured to order — US install, training & validated profiles from California.

Build 15.7×15.7×17.7 in / 400×400×450 mm

Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation, training and process support included from California.

Farsoon Technologies · SLS

Farsoon Flight® 403P-2 SLS 3D Printer – Dual-Fiber-Laser Industrial Production | 400×400×450 mm

The highest-throughput system in the 403 class: two 300 W fiber lasers scanning in parallel push build rates up to 9 L/h on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for serious polymer production, running high-performance nylons and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.

Dual 300 W fiber lasers — up to 9 L/h, the fastest 403-class throughput.
High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
Lead time: configured to order — US install, training & validated profiles from California.

Build 15.7x15.7x17.7 in / 400x400x450 mm, 15.7x15.7x21.3 in / 400x400x540 mm

Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation, training and process support included from California.

Farsoon Technologies · Metal LPBF

Farsoon FS121M LPBF Metal 3D Printer – Compact Frame for Dental and R&D | 4.7×4.7×3.9 in / 120×120×100 mm

The Farsoon FS121M is a metal LPBF 3D printer with a 4.7×4.7×3.9 in / 120×120×100 mm build envelope, running a single 300 W or 500 W fiber laser with a dynamic focusing system.

✓ 4.7×4.7×3.9 in — build cylinder
✓ 4.7×4.7×3.9 in / 120×120×100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 120×120×100 mm (4.7×4.7×3.9 in)

Prints 17-4PH, 316L, AlSi10Mg, CoCrMoW, Cu, CuSn10, HX, Ti-6Al-4V, 18Ni300, CoCrMo

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS191M LPBF Metal 3D Printer – Cylindrical Build with Heated Plate | ø7.5×7.8 in / ø191×199 mm

The Farsoon FS191M is a metal LPBF 3D printer with a ø7.5×7.8 in / ø191×199 mm build envelope, running a single 500 W fiber laser.

✓ ø7.5×7.8 in — build cylinder
✓ ø7.5×7.8 in / ø191×199 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build ø191×199 mm (ø7.5×7.8 in)

Prints 316L, AlSi10Mg, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm

The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.

✓ 2×500 W — dual fiber lasers
✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×230×300 mm (16.7×9.1×11.8 in)

Prints 316L, 420, AlSi10Mg, ST1, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS273M LPBF Metal 3D Printer – Wide Alloy Range | 10.8×10.8×14.0 in / 275×275×355 mm

The Farsoon FS273M is a metal LPBF 3D printer with a 10.8×10.8×14.0 in / 275×275×355 mm build envelope, running one or two 500 W lasers (FS273M / FS273M-2).

✓ 10.8×10.8×14.0 in — build envelope
✓ 10.8×10.8×14.0 in / 275×275×355 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 275×275×355 mm (10.8×10.8×14.0 in)

Prints 316L, 420, AlMgScZr, AlSi10Mg, AlSi7Mg, CuCrZr, H13, HX, IN718, Pure Copper, Ta, TA15, Ti-6Al-4V, W, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm

The Farsoon FS301M is a metal LPBF 3D printer with a 12.0×12.0×16.1 in / 305×305×410 mm build envelope, running one or two 500 W lasers, each covering the full build area.

✓ 12.0×12.0×16.1 in — build cylinder
✓ 12.0×12.0×16.1 in / 305×305×410 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 305×305×410 mm (12.0×12.0×16.1 in)

Prints 17-4PH, 316L, 420, AlSi10Mg, HAYNES 230, HX, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS350M LPBF Metal 3D Printer – 4×500 W, 4×1000 W or 6×500 W Lasers | 17.1×14.1×15.7 in / 433×358×400 mm

The Farsoon FS350M is a multi-laser LPBF metal 3D printer for medium- to high-volume series production, supplied in 4×500 W, 4×1000 W or 6×500 W laser configurations on the same 17.1×14.1×15.7 in / 433×358×400 mm build cylinder.

✓ Three laser configurations — we supply and support all three
✓ 17.1×14.1×15.7 in / 433×358×400 mm build on a 65 sq ft / 6 m² class footprint
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 433×358×400 mm (17.1×14.1×15.7 in) (Height incl. build plate)

Prints 17-4PH, 316L, AlSi10Mg, ST1, Ti-6Al-4V, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies

Have a CAD? Have a quote in 24h.