Made to order
- US installation commissioning and operator training included
- Validated parameters a parameter set for your first production alloy
Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm
The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.
- ✓ 2×500 W — dual fiber lasers
- ✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
What your process engineer actually checks
Throughput per square foot
Two 500 W lasers over a 425 mm long envelope on a 37.5 sq ft / 3.48 m² footprint. In an additive factory the number that matters is parts per square foot per year, and this frame is built around it.
An applications engineer on the line
Not a ticket queue — engineers who run LPBF in production in-house at AO Metal. Alloy qualification, parameter development, troubleshooting. Sub-4h reply, NDA on request.
The Farsoon FS200M-2 is a dual-laser LPBF system built for series production in molds, tooling and automotive. A long 16.7×9.1×11.8 in / 425×230×300 mm envelope, two 500 W lasers and a 37.5 sq ft / 3.48 m² footprint — the format for parts that repeat, not one-offs.
Why engineers choose the FS200M-2
Four things your process engineer will check first.
A long envelope, not a square one
425×230×300 mm suits parts that are long rather than bulky — sole molds, rails, manifolds. You nest more of them per plate than a square frame of the same volume would allow.
Dual-laser scanning with a robust recoater
Two 500 W lasers at up to 32.8 ft/s / 10 m/s, paired with industry-leading communication speed and a recoater built for continuous running. Faster production without giving up surface quality.
Top-feed powder, no build interruption
A high-efficiency top-feed system and a separate powder delivery unit handle material without disturbing the build in progress.
Two-stage filtration, 3.48 m² footprint
An integrated two-stage filter module stretches operating time between filter changes, and the compact floor plan lets you pack more machines per square foot of factory.
How we deliver and support it
What happens between the purchase order and your first qualified part.
Scope the cell
We size the configuration against your part mix, then plan power, argon or nitrogen supply and extraction with your facilities team. Machine envelope is 91.3×59.1×78.7 in / 2320×1500×2000 mm; EUR/China: 400V±10%, 3~/N/PE, 50Hz, 25A. The US transformer ships with the machine.
Install and train in the USA
Commissioning and operator training by our US service team. First builds are run together, so your operators hand over parts rather than a checklist.
Parameters, spares, engineer
Validated parameter sets for your alloy, US-held spares, and an applications engineer who has run LPBF in production in-house at AO Metal. Sub-4h reply, NDA on request.
What the FS200M-2 is built for
Dual-Laser Metal LPBF for Series Production. The FS200M-2 runs two 500 W fiber lasers over a 16.7×9.1×11.8 in / 425×230×300 mm build envelope. Full specifications are in the Specifications tab below.
Powder handling and workflow
Qualified materials
Farsoon lists 316L and AlSi10Mg, with ST1, Maraging Steel Grade 300 and 420 in process development for the FS200M-2. Because the platform is open, a grade outside that list is a parameter development project rather than a dead end, and one we can run with you. The alloys we stock are lot-certified and held in the USA.
Typical applications
Where FS200M-2 systems are actually running.
A production case, in numbers
| Metal shoe sole mold, 316L | Figure |
|---|---|
| Machine | FS200M-2, dual laser |
| Material | 316L |
| Build time | 17 hours |
| Envelope used | 16.7×9.1×11.8 in / 425×230×300 mm |
Case as published by Farsoon. Your build time depends on geometry, nesting and parameter set.
An aluminium heat exchanger with 0.2 mm walls
Farsoon publishes an automotive heat exchanger built on the FS200M-2 with partner SAPW: internal channels and a minimum wall thickness of 0.2 mm, in aluminium. Against machining and welding it removes the joints entirely, which is usually where this class of part fails.
Not sure the FS200M-2 is the right frame size?
Three Farsoon LPBF platforms either side of it.
Taller partsFarsoon FS301MView printer →
More lasersFarsoon FS350MView printer →
Why source the FS200M-2 through Additive Plus
- US sales, installation, commissioning and operator training by our own service team.
- Applications engineering from a team that runs LPBF in production in-house at AO Metal — parameter development, not a ticket queue.
- Lot-certified metal powders stocked in the USA for the alloys this machine runs.
- Leasing and financing available on capital equipment.
- Print a paid benchmark part in California before you commit to a system.
- Response under 24 hours · 200+ AM systems delivered across 23 countries.
| Brand | Farsoon Technologies |
| External Dimensions (L×W×H) | 91.3×59.1×78.7 in / 2320×1500×2000 mm |
| Build Volume | 425×230×300 mm (16.7×9.1×11.8 in) |
| Net Weight | Approx. 4409 lb / 2000 kg |
| Layer thickness | 0.0008–0.0039 in / 0.02–0.1 mm |
| Scanning Speed | Max. 32.8 ft/s / 10 m/s |
| Laser Type | Dual fiber lasers, 2×500W |
| Scanner | F theta lenses |
| Inert Gas Protection | Argon/Nitrogen |
| Average Inert Gas Consumption in Process | 3-5 L / min |
| Operating system | 64 bit Windows 10 |
| Software | BuildStar, MakeStar® |
| Data File Format | STL |
| Key Software Features | Open machine key parameters, real-time build parameter modification, three-dimensional visualization, diagnostic functions |
| Power Supply | EUR/China: 400V±10%, 3~/N/PE, 50Hz, 25A · US: transformer supplied with the machine |
| Operating Ambient Temperature | 71.6-82.4 °F / 22-28 °C |
| Material | 316L, 420, AlSi10Mg, ST1, 18Ni300 |
| Technology | Metal LPBF |
| Printing Materials | Metal Powders |
Send your STL and we print a paid benchmark part on a Farsoon metal LPBF system in California, with the parameter set and the cost per part written up.
Other products teams run alongside Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm
Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.
- 320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
- 7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
- Lead time: configured to order — install, training & debind/sinter support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
Large-format industrial SLA. Marble frame. Vacuum recoating. Built for automotive panels, one-piece patterns, dental models, and architectural forms — without stitching or Z-seam artifacts.
- ✓ 33×33×20 in / 850×850×500 mm build chamber — a full fascia pattern or a batch of shoe lasts in one run
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 15.0 m/s max scan
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
The Farsoon FS301M is a metal LPBF 3D printer with a 12.0×12.0×16.1 in / 305×305×410 mm build envelope, running one or two 500 W lasers, each covering the full build area.
- ✓ 12.0×12.0×16.1 in — build cylinder
- ✓ 12.0×12.0×16.1 in / 305×305×410 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Made to order
· Built to order
Heron AM configured with the High Accuracy (HA) extruder head — Caracol's 6-axis robotic large-format additive platform. 2 kg/h through 1–5 mm nozzles at up to 350°C, pellet-fed with optional hybrid CNC milling. EN9100 and ISO 9001 certified. Priced by configuration.
- ✓ 6-axis robotic LFAM — freeform geometries up to 15 m, beyond any gantry
- ✓ High Accuracy head: 2 kg/h, 1–5 mm, 350°C — fine detail, best surface finish
- ✓ EN9100 + ISO 9001 certified · lead time confirmed at quote
Made to order
· Lead time confirmed per configuration at quote. Talk to a specialist for a schedule.
Industrial FFF. Klipper high-speed. Closed-loop servos. Built for functional prototypes, jigs, fixtures and small production runs in standard engineering filaments — with the repeatability hobby machines can't hold.
- ✓ 11.81×11.81×15.75 in / 300×300×400 mm build volume — industrial linear guides on XY
- ✓ Klipper high-speed to 350 mm/s · 70 W Volcano hot end · heated bed to 120 °C
- ✓ Open 1.75 mm ecosystem — PLA, ABS, PETG, TPU from any supplier · BMG dual-drive
- ✓ Ships configured & tested — onboarding and demo units available
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
The Farsoon HT601P-2 is a large-format SLS 3D printer built for lower cost per part — a 600 × 600 × 600 mm cubic build, dual 100 W CO₂ lasers reaching up to 12 kg of finished parts per day, and a 220 °C chamber for engineering polymers.
- ✓ Cubic 600 mm build · dual CO₂ for lower cost per part
- ✓ Open platform — PA6, PBT, PA11, PA12, TPU
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Lead time: configured to order — request a build slot. US installation and operator training included.
Compact high-precision industrial SLA. Marble frame. Vacuum recoating. Built for fine-detail parts — dental models, jewelry masters, small engineering prototypes and casting patterns — at industrial accuracy.
- ✓ 12×14×14 in / 300×350×350 mm build chamber — fine detail without a large footprint
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 0.0005 mm vertical resolution
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 8–10 weeks — on-site install, calibration & operator training included
Made to order
· Ships in 8–10 weeks from order placement. Need it sooner? Talk to a specialist.
The Farsoon FS1521M is a metre-scale LPBF metal 3D printer for serial production — a 1530 × 1530 mm platform with 16 × 500 W fiber lasers as standard, scaling to as many as 32 lasers and an 1650 mm Z-height (3,862 L) on the FS1521M-U.
- ✓ Metre-scale 1530 × 1530 mm platform · up to 32 × 500 W fiber lasers
- ✓ Titanium, nickel superalloy, stainless and aluminium alloys
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Request a build slotWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which alloys are qualified for the Farsoon FS200M-2?
Why is the FS200M-2 build envelope long rather than square?
Is the FS200M-2 an open system, or are we locked to vendor parameters?
What part size does the FS200M-2 handle, and what fits in one build?
What does installation and training in the USA involve for the FS200M-2?
How does the FS200M-2 compare with the other Farsoon metal platforms?
Can we test the FS200M-2 before committing to a purchase?
Place your order, or talk to an engineer first
Order Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm direct, or talk to materials engineer