Microtrac · Chemisorption / temperature-programmed analysis (TPD/TPR/TPO)
Microtrac BELCAT II Catalyst Analyzer – TPD/TPR/TPO & Pulse Chemisorption | –120 to 1200 °C
Fully automated chemisorption analyzer for catalyst characterization — TPD, TPR, TPO, pulse chemisorption and single-point BET on a high-sensitivity 4-element TCD, from –120 to 1200 °C.
- ✔ TPD · TPR · TPO · TPX · TPSR · pulse chemisorption · BET
- ✔ 4-element semi-diffusion TCD · automatic baseline zero
- ✔ –120 °C (CATCryo II) to 1200 °C · heating up to 110 °C/min
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Closed-cycle cryostat for gas adsorption
Microtrac BELCRYO X Cryogenic Unit for BELSORP – LN₂-Free Temperature Control | 35–473 K
Closed-cycle cryogenic unit for the BELSORP series — temperature control from 35 to 473 K without liquid-nitrogen top-ups, ±0.001 K stability, for variable-temperature adsorption and gas-storage studies.
- ✔ 35–473 K, no liquid-nitrogen refills · helium closed cycle
- ✔ Stability ±0.001–0.01 K · up to 3 samples
- ✔ Integrates with BELSORP MAX X, MAX G, MINI X via BELControl
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Quadrupole mass spectrometry (evolved gas analysis)
Microtrac BELMASS II Quadrupole Mass Spectrometer – Evolved Gas Analysis for BELCAT | m/z 1–200
Quadrupole mass spectrometer for evolved-gas analysis — couples to the BELCAT II to identify desorbed and reaction species during TPD, TPR and thermal decomposition, across m/z 1–200.
- ✔ Mass range m/z 1–200 · Faraday cup or SEM detector
- ✔ Selected-ion monitoring on up to 16 channels
- ✔ Couples to BELCAT II for TPD-MS / evolved-gas analysis
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Mercury intrusion porosimetry
Microtrac BELPORE Mercury Porosimeter – Pore Size & Volume | 3.6 nm–180 µm, up to 414 MPa
Mercury intrusion porosimeter for pore size and pore volume from 3.6 nm to 180 µm — pressure to 414 MPa, up to 20,000 measuring points, with fractal, tortuosity and permeability analysis.
- ✔ Pore diameter 3.6 nm – 180 µm (LP / MP / HP stages)
- ✔ Pressure to 414 MPa · accuracy better than 0.1% F.S.
- ✔ Up to 20,000 intrusion / extrusion points
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Vacuum / flow degassing (sample pretreatment)
Microtrac BELPREP VAC Vacuum Degasser – Sample Pretreatment for Gas Adsorption | 3 or 6 Ports
Vacuum degasser for gas adsorption sample preparation — removes moisture and contaminants by vacuum and heat on 3 or 6 ports, so your BELSORP analyzer stays free for measurement.
- ✔ 3 or 6 pretreatment ports · parallel sample prep
- ✔ Vacuum + heat degassing (optional flow + heat)
- ✔ Frees the analyzer — prep while it measures
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Gas displacement pycnometry (true / skeletal density)
Microtrac BELPYCNO Gas Pycnometer – True & Skeletal Density | 0.03% Accuracy, 1/3.5/10 cm³ Cells
Gas-displacement pycnometer for true and skeletal density of powders and solids — 0.03% accuracy, helium or nitrogen, with 10, 3.5 and 1 cm³ sample cells.
- ✔ Accuracy 0.03% of F.S. + 0.03% of reading · repeatability 0.02%
- ✔ He / N₂ gas displacement · greaseless one-touch cell
- ✔ Three cell sizes: 10 · 3.5 · 1 cm³
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Gas adsorption (volumetric, BET / micropore)
Microtrac BELSORP MAX G Gas Adsorption Analyzer – BET Surface Area & Micropore | 0.35–500 nm
Dedicated volumetric gas adsorption analyzer for BET surface area and micro-to-mesopore distribution — ultra-low pressure to P/P₀ 10⁻⁸, from 0.0005 m²/g with krypton.
- ✔ Surface area from 0.01 m²/g (N₂), 0.0005 m²/g (Kr)
- ✔ Pore size 0.35–500 nm · micropore via HK/SF/NLDFT
- ✔ Ultra-low pressure P/P₀ = 10⁻⁸ · up to 5 ports
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Gas adsorption (manometric / volumetric)
Microtrac BELSORP MAX X Gas Adsorption Analyzer – Surface Area & Pore Size (BET) | 0.35–500 nm, 4 Ports
Manometric (volumetric) gas adsorption analyzer for BET specific surface area and pore size distribution — 0.35–500 nm pores, N₂ / Ar / CO₂ and organic vapors, up to four samples in parallel, referenced to ISO 9277 and ISO 15901-2.
- ✔ Surface area from 0.01 m²/g (N₂) · 0.0005 m²/g (Kr)
- ✔ Micropore to macropore: 0.35–500 nm, P/P₀ down to 10⁻⁸
- ✔ Up to 4 measurement ports · 3 gas ports expandable to 12
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
