Microtrac · Chemisorption / temperature-programmed analysis (TPD/TPR/TPO)
Microtrac BELCAT II Chemisorption Catalyst Analyzer
Acid sites, reducibility, coke and metal dispersion of a solid catalyst on one automatic instrument — TPD, TPR, TPO and pulse chemisorption from −120 to 1200 °C.
- Eight gas ports, mixtures blended inside the instrument
- Breakthrough curves and BET; BELMASS II option to identify the gases
- Installation and on-site training included · free test analysis of your catalyst
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Closed-cycle cryostat for gas adsorption
Microtrac BELCRYO X Cryogenic Unit for BELSORP Analyzers
Cryogenic unit for BELSORP analyzers — adsorption isotherms at any temperature from 35 to 473 K without liquid nitrogen, stability to ±0.001 K.
- Add-on for BELSORP MAX X (incl. HP), MAX G and MINI X
- Up to 3 samples, fully automated in BELControl
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Quadrupole mass spectrometry (evolved gas analysis)
Microtrac BELMASS II Mass Spectrometer for the BELCAT II
An add-on mass spectrometer for the BELCAT II that tells you which gases evolve in TPD, TPR and breakthrough runs — m/z 1 to 200, up to 16 mass numbers followed at once.
- Faraday cup or SEM detector, resolution M/ΔM ≥ 2M
- Heated hose up to 200 °C for vapors, including ammonia
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Mercury intrusion porosimetry
Microtrac BELPORE Mercury Porosimeter
Pore size distribution and pore volume by mercury intrusion — 3.6 nm to 180 µm, to 1 mm with the Ultra-Macropore Set, up to 414 MPa and 20,000 measuring points.
- LP, MP and HP instruments · PoreInspect runs up to four from one PC
- No gas connection or liquid nitrogen · moist samples on the LP
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Vacuum / flow degassing (sample pretreatment)
Microtrac BELPREP VAC Vacuum Degasser for Gas Adsorption
Vacuum degasser for BELSORP gas adsorption analyzers — prepares 3 or 6 samples at up to 430 or 450 °C while the analyzer measures.
- Vacuum / heat degassing, flow / heat under inert gas as an option
- Add-on for BELSORP MINI X, MAX G and MAX X analyzers
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Gas displacement pycnometry (true / skeletal density)
Microtrac BELPYCNO Gas Pycnometer – True & Skeletal Density | 0.03% Accuracy, 1/3.5/10 cm³ Cells
Gas-displacement pycnometer for true and skeletal density of powders and solids — 0.03% accuracy, helium or nitrogen, with 10, 3.5 and 1 cm³ sample cells.
- ✔ Accuracy 0.03% of F.S. + 0.03% of reading · repeatability 0.02%
- ✔ He / N₂ gas displacement · greaseless one-touch cell
- ✔ Three cell sizes: 10 · 3.5 · 1 cm³
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
Microtrac · Gas adsorption (volumetric, BET / micropore)
Microtrac BELSORP MAX G BET Surface Area and Micropore Analyzer
Micropore-capable BET surface area and pore size analyzer — isotherms from P/P₀ = 10⁻⁸, pores 0.35 to 500 nm, krypton down to 0.0005 m²/g.
- One measurement port with dedicated p₀ and free-space ports, AFSM™ accuracy
- BET, BJH, HK, SF and NLDFT / GCMC analysis in BELMASTER 7
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
Microtrac · Gas adsorption (manometric / volumetric)
Microtrac BELSORP MAX X Gas and Vapor Adsorption Analyzer
BET surface area and pore size from 0.35 to 500 nm on up to four samples at once — gas and vapor isotherms from P/P₀ = 10⁻⁸.
- Surface area from 0.01 m²/g with N₂, from 0.0005 m²/g with krypton
- Micropore to macropore analysis: BET, BJH, HK, SF, NLDFT / GCMC
- Installation and on-site training included · free test analysis of your sample
- Configured to order · lead time from 4 weeks
Request a formal quotation →
Made to order
· Lead time from 4 weeks · installation included
