Equipment
The QATM QCUT 250 M is a user-friendly manual wet abrasive cut-off machine with fine dynamic lever feed — sectioning samples up to Ø 90 mm with cutting wheels to Ø 250 mm (10″).
- ✔ Ø 90 mm capacity · wheel to Ø 250 mm (10″) · 145 mm Y-axis
- ✔ Openings both sides for long parts · large stainless table · door interlock & standstill monitoring
- ✔ Lead time: configured to order — installation & training included
Made to order
· Lead time: configured to order — request current timeline
The QATM QCUT 350 A is a fully automatic wet abrasive cut-off machine with electronic force and distance control, program memory and Multi-Position-Process — sectioning samples up to Ø 135 mm.
- ✔ Ø 135 mm capacity · wheel to Ø 356 mm (14″) · variable 800–3400 rpm
- ✔ Automatic X/Y, pulsed cutting, MPP multi-sample & automatic touch detection
- ✔ Lead time: configured to order — installation & training included
Made to order
· Lead time: configured to order — request current timeline
The QATM QETCH 100 M is a mobile, battery-powered electrolytic polisher and etcher for use outside the lab — 90 V DC, 2 A, a ~Ø 9 mm polishing area, in a rugged epoxy-coated aluminium case with handle and carrying strap.
- ✔ Battery-powered and portable — electrolytic polishing and etching in the field
- ✔ 90 V DC, 2 A, ~Ø 9 mm polishing area for on-site metallography
- ✔ Rugged epoxy-coated aluminium housing; sensitive parts protected for transport
- ✔ Lead time: configured to order — request the current timeline
Made to order
· Lead time: configured to order — request current timeline
The QATM QETCH 1000 is a fully automatic electrolytic polisher and etcher with intuitive touch-screen control — 90 V DC up to 14 A, a scan function that maps a material's voltage curve, and interchangeable 1 L electrolyte tanks.
- ✔ Fully automatic electrolytic polishing (1 s–25 min) and etching (1 s–5 min)
- ✔ Scan function displays a material's voltage curve for fast results without structural change
- ✔ Interchangeable 1 L electrolyte tanks; separated unit works in a fume cabinet
- ✔ Lead time: configured to order — request the current timeline
Made to order
· Lead time: configured to order — request current timeline
Compact optical analyzer and inverse macroscope for standard-compliant weld-seam inspection and macro analysis — 8.5 MP 4K camera, 35× combined zoom and Intelligent Area Illumination.
- ✔ 8.5 MP 4K camera · 20× optical / 35× combined zoom
- ✔ Field of view 80×60 mm to 2.3×1.7 mm · IAI LED illumination
- ✔ DIN EN ISO 5817 weld reports · Qpix Control2 (shared with hardness testers)
- ✔ Lead time: configured to order — request current timeline
Made to order
· Lead time: configured to order — request current timeline
The QATM QGRIND 100 is a stable wet double-belt grinder for deburring and pre-grinding metallographic and AM samples — two endless belts run at 7 m/s, and you can mount two different grits at once.
- ✔ Two endless belts (100 × 920 mm) — run two grit sizes side by side
- ✔ Wet grinding at 7 m/s flushes swarf away through the water supply
- ✔ Deburr as-cut and printed parts fast before fine grinding and polishing
- ✔ Lead time: configured to order — request the current timeline
Made to order
· Lead time: configured to order — request current timeline
The QATM QGRIND XL is a powerful automated planar grinding machine for maximum material removal with high precision — a Ø 356 mm grinding stone, ForceControl to 750 N and SmartGrind process monitoring.
- ✔ ForceControl electromotive pressing (50–750 N) for reproducible, defined removal
- ✔ SmartGrind auto-determines dressing intervals for efficient, monitored grinding
- ✔ Combine roughing and finishing modes; integrated cleaning station
- ✔ Lead time: configured to order — request the current timeline
Made to order
· Lead time: configured to order — request current timeline
The QATM QMOUNT is a UV light-curing cold mounting device that embeds heat- and pressure-sensitive metallographic and AM specimens in transparent resin — 365 nm LED curing, adjustable 0–100 min, sample support up to 200 × 260 mm.
- ✔ Cures at 365 nm without press heat or pressure — ideal for delicate and porous AM parts
- ✔ Transparent mounts you can remove in a short cycle; curing time adjustable 0–100 min
- ✔ Connect a QATM suction unit for extra work safety
- ✔ Lead time: configured to order — request the current timeline
Made to order
· Lead time: configured to order — request current timelineNot sure which system fits?
Tell us your application. We'll send our top recommendation.
Browse all categories
Printers, materials, print services and lab equipment — including AO Metal, the LPBF printer we design and build ourselves.
Have a CAD? Have a quote in 24h.
Upload your file or talk to an engineer — no obligation, no spam, NDA on request. First-time customers get free DfAM review.