Farsoon Technologies · SLS
Farsoon 252P Series SLS 3D Printer – Open Platform | 250×250×320 mm
Production-grade SLS platform for polymer R&D and small-batch manufacturing. Available in three chamber configurations — HT252P (428°F/220°C), ST252P (536°F/280°C) and UT252P (644°F/340°C) — the 252P processes PA12, PA11, PA6, TPU, PPS, PEEK and PAEK on a fully open-parameter platform.
- ✓ Eight-zone radiant heating — bed uniformity ≤ 2°C, no cold-corner warping
- ✓ Fully open parameters — laser, speed, layer thickness, temperature all user-accessible
- ✓ PEEK / PAEK capable (UT252P) — 644°F/340°C max chamber, rare at this build class
- ✓ Lead time: configured to order — US install, operator training and validated profiles included
Build 9.8x9.8x12.6 in / 250x250x320 mm
Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT
Made to order
· Configured to order — US install, training and validated profiles included; contact us for current lead time.
Farsoon Technologies · SLS
Farsoon 403P Series SLS 3D Printer – Open-Platform Polymer, Nylon & TPU Production | 400×400×450 mm
Open-platform industrial SLS system for polymer production — a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall), CO₂ laser and eight-zone thermal control. Runs nylons, filled compounds and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Open-parameter SLS — full process control, any compatible powder, build rates to 4.0 L/h.
- Broad materials — PA12, filled nylons, glass-bead, TPU & PP; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 15.7x15.7x17.7 in / 400x400x450 mm, 15.7x15.7x21.3 in / 400x400x540 mm
Prints FS1088A-TPU, FS1092A-TPU, FS3150CF, FS3250MF, FS3300PA-F, FS3401GB-F, FS4100PA, FS6140GF (for HT403P only), Ultrasint® PA6 (for HT403P only), Ultrasint® PP nat 01
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Farsoon Technologies · SLS
Farsoon Flight® 403P SLS 3D Printer – Fiber-Laser High-Performance Polymer | 400×400×450 mm
Fiber-laser SLS system: a 500 W fiber laser with dynamic optics drives build rates up to 6 L/h with a fine ~100 µm contour spot, on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for high-performance polymers and demanding production, with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- 500 W fiber laser — up to 6 L/h, ~100 µm contour for crisp features.
- High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 15.7×15.7×17.7 in / 400×400×450 mm
Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
Farsoon Technologies · SLS
Farsoon Flight® 403P-2 SLS 3D Printer – Dual-Fiber-Laser Industrial Production | 400×400×450 mm
The highest-throughput system in the 403 class: two 300 W fiber lasers scanning in parallel push build rates up to 9 L/h on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for serious polymer production, running high-performance nylons and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.
- Dual 300 W fiber lasers — up to 9 L/h, the fastest 403-class throughput.
- High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
- Lead time: configured to order — US install, training & validated profiles from California.
Build 15.7x15.7x17.7 in / 400x400x450 mm, 15.7x15.7x21.3 in / 400x400x540 mm
Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT
Made to order
· Lead time: configured to order — request a build slot. US installation, training and process support included from California.
