Composite Tooling Materials for 3D Printing

Composite Tooling

Materials for additively manufactured composite tooling — printing layup molds, masters, and fixtures directly instead of machining them. High-temperature, dimensionally stable feedstocks stand up to autoclave and oven cure cycles, cutting tooling lead time and cost. Explore the range for large-format and precision composite tooling applications.

35 products From $225

Showing 17–24 of 35 Composite Tooling

Sygnis · DIW

Printing Silicones on the Sygnis F-NIS and Sygpast – DIW Guide

Print your own silicone — the Sygnis F-NIS 23151 and Sygpast are open DIW platforms for one- and two-component silicones you formulate or buy.

One-component, moisture-curing and UV-curing silicones on the F-NIS
UV 365/405 nm, 60 °C heated cartridge, cooled platform or two heads by version
Two-component silicones and supported soft parts on the Sygpast
K2 silicone in the box for calibration · you source the production material

Choose your F-NIS →

Get quote

In stock

· Free DIW guide · not sold as a material

3DCeram · CERAMIC SLA

Tricalcium Phosphate 3D Printing Paste

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Tricalcium Phosphate (TCP)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 3Y 3D Printing Paste

Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.

✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 8Y 3D Printing Paste

Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.

✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Zirconia (ZrO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Alumina 1,75mm

Print dense alumina (Al₂O₃) ceramic parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to a technical-ceramic component.

✔ 295 MPa average flexural strength, 213 GPa elastic modulus and 3.9 g/cc after solid-state sintering at 1650°C
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm ceramic feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Prints Alumina (Al2O3)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Metal 17-4PH 1,75mm

Print 17-4PH stainless-steel parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, precipitation-hardenable metal.

✔ Rp0.2 680 MPa / Rm 880 MPa / 257 HV10 — tested to DIN EN ISO 6892 & 6507-1 at ESA's ESTEC facility
✔ Debind & sinter parameters plus full datasheet included with every spool
✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Metal 316L 1,75mm

Print 316L stainless-steel parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, corrosion-resistant metal.

✔ Rp0.2 149 MPa, Rm 485 MPa and 158 GPa modulus after sintering — tested to ASTM E8/E8M
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Metal Copper 1,75mm

Print pure-copper parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, thermally and electrically conductive metal.

✔ 228 W/m-K thermal conductivity, 8.4 g/cc density and 118 GPa modulus after sintering
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

Composite Tooling

Have a CAD? Have a quote in 24h.