Out of stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
FibreSeek PETG Basic Filament — Black, 1.75 mm, 4 × 1 kg pack
- PETG matrix plastic for FibreSeeker 3 — plain FFF or with continuous fiber
- 1.75 mm, black · pack of 4 × 1 kg spools
$100
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA on request.
FibreSeek PETG Basic filament for the FibreSeeker 3 — use it on its own in high-speed mode or as the plastic around continuous fiber.
- Material: PETG
- Diameter: 1.75 mm
- Colour: black
- Pack: 4 spools × 1 kg
For the FibreSeeker 3 continuous-fiber 3D printer.
Currently out of stock. Contact us at [email protected] for the next available date.
We source and qualify. Custom variants on request.
Other products teams run alongside FibreSeek PETG Basic Filament — Black, 1.75 mm, 4 × 1 kg pack
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
- ✔ Excellent hot hardness and wear resistance, heat-treatable
- ✔ Print → debind → sinter — great for tooling, dies and inserts
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✔ Electrically insulating, very hard and wear-resistant, stable at high temperatures
- ✔ Print → debind → sinter to dense alumina — no powder bed, no special printer
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✔ Very high hardness, excellent thermal performance, chemically resistant
- ✔ Print → debind → sinter — advanced technical ceramic without a powder system
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✔ Specialty technical ceramic produced on an everyday FFF machine
- ✔ Print → debind → sinter to dense ceramic, no powder system required
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✔ High toughness and wear resistance with a striking black finish
- ✔ Print → debind → sinter to dense ceramic on a standard FFF printer
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✔ Smooth, glazeable porcelain finish with a classic ceramic look
- ✔ Print → debind → fire — ceramic printing on an everyday FFF machine
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
Carbon-fiber-reinforced high-temperature nylon filament for FDM 3D printing — the strongest, stiffest, most heat-resistant material in the CreatBot range (125 MPa tensile, 8512 MPa flexural modulus, 188°C glass transition), for demanding structural and end-use parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
What our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Place your order, or talk to an engineer first
Order FibreSeek PETG Basic Filament — Black, 1.75 mm, 4 × 1 kg pack direct, or talk to materials engineer