Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
In every order
- Lot-matched pellets pre-colored yellow impact-copolymer PP, sealed 2 lb unit
- Processing sheet melt/mold parameters and key properties
Materials, Other 3D Printing Materials, Other Equipment, Plastic Injection Molding Machine, Plastic Pellets
Polypropylene (PP) Yellow Pellets - 2 lbs
Versatile, Impact-Resistant Copolymer for Custom Applications
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
$85
Price held 7 days after order.
NDA standard
Ships in 1–2 business days
What your process engineer actually checks
What your process engineer actually checks
Consistent color, straight from the pellet
PP Yellow is a medium-flow impact polypropylene copolymer (20 MFR): uniform color with no masterbatch mixing, good impact resistance, and easy mold filling for vibrant, durable parts. Every unit ships with molding guidance so color and part quality stay consistent.
A materials engineer on the line
Need a specific color match or grade advice? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
About this product
PP Yellow pellets are a pre-colored, medium-flow impact polypropylene copolymer (20 MFR) — uniform yellow color with no masterbatch mixing, good toughness, and easy processing for vibrant, functional molded parts.
Why engineers choose pre-colored PP Yellow
Consistent color and copolymer toughness, ready to run.
Pre-colored yellow
Ready-to-use pellets give uniform, repeatable yellow with no masterbatch mixing or dosing step.
Good flow (20 MFR)
Medium melt flow balances easy mold filling with part strength for a wide range of geometries.
Good impact resistance
The copolymer base offers superior toughness to homopolymer PP for parts that get daily handling.
Versatile
Suits a broad range of injection-molded parts that need a durable, cleanly colored plastic.
How we supply it
Genuine resin, ready to mold, with the parameters your process engineer needs.
Step 01
Sourced & lot-traced
Pre-colored yellow impact-copolymer PP, packed in sealed 2 lb units and shipped from US stock. Minimum order 5 units.
Step 02
Mold ready
Polypropylene absorbs little moisture, so drying is not typically required. Store sealed in a dry place before use.
Step 03
Molding parameters included
Melt 204–243°C (400–470°F), mold 10–38°C (50–100°F). Dial the line in once, reorder the same color.
Typical applications
Durable, cleanly colored parts across consumer and industrial use.
Storage containers
Housewares & bins
Kitchen utensils
Everyday goods
Toys
Vibrant durable parts
Handles & caps
Housings & components
Color-coded parts
Assembly, safety, branding
General molding
Durable colored plastic
Key properties
| Property | Value |
|---|---|
| Base resin | Medium-flow impact copolymer (CoPP) |
| Melt flow rate (MFR) | 20 g/10 min |
| Melt temperature | 204–243°C (400–470°F) |
| Mold temperature | 10–38°C (50–100°F) |
| Drying | Not typically required |
Need a different color or grade?
We stock this impact copolymer in several colors, plus black and natural grades.
Tell us your part and the exact color you need — a materials engineer can confirm the grade or arrange a custom color match. Sub-4h reply, NDA standard.
Why source pellets through Additive Plus
- Injection-molding feedstock, ready to run — genuine grades matched to the APSX-PIM and standard molders, packed in convenient 2 lb units.
- US stock, fast dispatch — ships in 1–2 business days; no overseas lead times on material.
- Engineer on the line — color matching, parameters, and grade selection from a team that molds these materials, not a call center.
| Brand | APSX |
| Country of origin | USA |
| Platform | Injection Molding |
| Melt Flow Rate (MFR) g/10 min | 20 |
| Melt Temperature °C | 400-470 |
Need a specific color or grade?
We stock this impact copolymer in several colors plus black and natural grades, and can arrange a custom color match against your target. 20+ injection-molding grades on the shelf.
Other products teams run alongside Polypropylene (PP) Yellow Pellets - 2 lbs
Engineering
CreatBot Ultra PA CF - Carbon Fiber Nylon Filament - 1kg
Carbon-fiber-reinforced high-temperature nylon filament for FDM 3D printing — the strongest, stiffest, most heat-resistant material in the CreatBot range (125 MPa tensile, 8512 MPa flexural modulus, 188°C glass transition), for demanding structural and end-use parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
From $100
Add to cart
In stock
Composite Tooling · DED, EBM, Metal LPBF
H13 Tool Steel Powder for Metal 3D Printing | LPBF - 10 kg / 22 lbs
Hot-work tool steel. Thermal-fatigue resistant. High-temp strength. Genuine Carpenter PowderRange® H13 (1.2344) for LPBF metal 3D printing.
- ✓ High toughness & thermal-fatigue resistance for die-casting tooling
- ✓ Gas-atomized — full COA on every lot
- ✓ Sold in small, workable volumes · fast dispatch from L.A.
Prints H13 Tool Steel Powder
From $480
Get quote
In stock
· 2–5 business days · stock moves fast, confirm at order
Ceramic 3D Printing Materials · CERAMIC SLA
Zirconia 8Y 3D Printing Paste
Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.
- ✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Other Equipment
Nexa3D xCure - 100-250V
Post-curing maximizes material properties, improving parts strength, and providing consistent mechanical performance part to part and build to build.
From $7875
Add to cart
On backorder
Ceramic 3D Printing Materials · CERAMIC SLA
Alumina Toughened Zirconia 3D Printing Paste
Print the strongest oxide in the range — alumina-toughened zirconia — on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense biocompatible ceramic.
- ✓ 1094 MPa 4-point bending strength at >5.2 g/cc — highest of the 3DCeram oxides
- ✓ Biocompatible and thermal-shock resistant — implants, dental and high-load wear parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Dental · LSPc, DLP, XiP
Nexa3D KeyGuide Resin 1kg For XiP
KeyGuide® is a stiff, biocompatible (class I) 3D Printing resin designed to create surgical guides. The material is stiff and durable to withstand the forces of guided surgery in the oral cavity.
From $279
Add to cart
In stock
Cobalt Base · Metal LPBF
A-Powder Cobalt Chrome Powder (CoCrMo) for Metal 3D Printing | LPBF Compatible – 10 kg / 22 lbs
Wear-resistant. Biocompatible. High-hardness. Genuine AO Metal CoCrMo cobalt-chrome superalloy for LPBF metal 3D printing.
- ✓ Gas-atomized, low-oxygen — full COA per lot
- ✓ China-produced — workable volumes, no mill minimums
- ✓ Fast dispatch from Los Angeles
Prints CoCrMo
From $1470
Get quote
In stock
· 10–20 business days
Depowdering stations · Cleaning, Surface finishing
AM Solutions S1 — Automated Depowdering & Surface Finishing System
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 6–9 weeks — built to order · install + training included
From $69920
Add to cart
On backorder
· Lead time: 6–9 weeks — built to order. Install and operator training included.From teams molding colored PP
Unedited feedback from injection-molding shops.
★★★★★
Color's uniform batch to batch and we skipped masterbatch entirely — cleaner process.
MH
Mia H. Process Engineer · Consumer products
★★★★★
Good impact for handles and caps that get daily abuse. Molds easy on our desktop press.
SO
Sam O. Product Engineer · Housewares
★★★★★
Reliable colored PP for color-coded parts on the line. No surprises.
IL
Ivy L. Manufacturing Engineer · Assembly
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Do I need to dry PP Yellow before molding?
Not usually. Polypropylene absorbs very little moisture, so PP Yellow does not typically require drying. Store the sealed units in a cool, dry place and keep them closed until use. A short dry only helps if the pellets have been exposed to humidity for a long time.
Is the yellow color pre-mixed into the pellet?
Yes. PP Yellow is pre-colored, so you do not add masterbatch during molding. That delivers uniform, repeatable yellow straight from the pellet and removes a mixing and dosing step, which helps keep color consistent from part to part and batch to batch.
What melt and mold temperatures does PP Yellow need?
PP Yellow molds at a melt temperature of 204–243°C (400–470°F) with a mold temperature of 10–38°C (50–100°F). Its 20 MFR flow suits a wide range of geometries. These are starting points — a materials engineer can help tune them for your part and machine.
What is PP Yellow used for?
PP Yellow suits storage containers, housewares, kitchen utensils, toys, handles, caps, housings, and color-coded parts for assembly, safety, or branding. Its impact-copolymer base gives durable, cleanly colored parts for both consumer and industrial molding.
How is PP Yellow packaged and what is the minimum order?
PP Yellow ships in sealed 2 lb units, and the minimum order is 5 units (10 lbs total). Larger volumes and official purchase orders are welcome — contact us for volume pricing. Material ships from US stock, typically within 1–2 business days.
Will PP Yellow run on the APSX-PIM desktop molder?
Yes. PP Yellow is formulated for desktop and standard injection molding, including the APSX-PIM. Its medium flow makes it easy to fill on smaller machines. Our team can confirm shot size and parameters for your specific mold.
Can I get this PP in other colors?
Yes. The same medium-flow impact copolymer is stocked in several pre-colored options, including blue, purple, and black, plus natural grades. For a specific brand or Pantone target, we can arrange a custom color match — contact a materials engineer.
Place your order, or talk to an engineer first
Order Polypropylene (PP) Yellow Pellets - 2 lbs direct, or talk to materials engineer