Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
With every system
- Install, operator training, and validated molding parameters
- Tailored warranty with same-week dispatch on critical issues
Accessories APSX, Other Equipment, Plastic Injection Molding Machine
SAS SS-400 Fume Extraction
It is used for a variety of industrial applications that require the capture and filtration of airborne contaminants and chemical fumes.
$4,275
Price held 7 days after order.
Install + training included
Tailored service plan
Built for production teams
What your process engineer actually checks
From printed prototype to molded part
We use injection molding to bridge our own printed prototypes into short runs, so install includes validated parameters for your resin and tooling guidance. The team that trains you actually molds parts — not a distributor reading a manual.
An applications engineer on the line
Questions on tooling, shot size, cycle times, or pellet selection? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
About this product
Powerful, Industrial-Grade Performance
-
700 CFM Extraction: Robust suction power capable of handling heavy fumes and particulates from welding, soldering, chemicals, and industrial processes.
-
Variable Speed Control: Adjust the airflow to match the specific task, optimizing noise and filtration efficiency.
Unmatched Usability & Portability
-
True Portability: Integrated handle and locking casters allow you to easily move this powerful unit anywhere it’s needed on the production floor.
-
360° Swivel Arm: The self-supportive flexible arm positions precisely and stays in place, providing optimal capture at the source.
-
“No-Tool” Filter Changes: Minimize downtime with a filter system designed for quick, simple, and clean replacement.
Reliable & Economical Operation
-
Quiet and Efficient: Engineered for low noise levels and low power consumption, reducing operational costs.
-
Long Filter Life & Low Maintenance: High-capacity filters and a reliable direct-drive motor ensure long intervals between maintenance.
-
Optional Magnehelic Gauge: This add-on visually alerts operators to filter loading, indicating precisely when a change is needed for peak performance.
-
Optional Hour Counter: Tracks total operational hours for scheduling proactive maintenance and validating filter life.
Ideal For:
-
Welding & Metal Fabrication (fume capture)
-
Laboratory Chemical Procedures
-
Industrial Soldering & Electronics Manufacturing
-
Pharmaceutical Compounding
-
Any application generating hazardous airborne contaminants
| Brand | APSX |
| Country of origin | USA |
| Platform | FIM |
Need tooling or a specific resin?
We mold our own. Tooling and trials on request.
Need a mold built, an insert cut, or a trial run before committing? We can produce tooling and run sample shots on the actual machine so you see molded parts first. Typical tooling lead 2–4 weeks.
Other products teams run alongside SAS SS-400 Fume Extraction
Media blasting · Surface finishing
AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts
Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.
- ✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
- ✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
- ✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California
From $20560
Add to cart
On backorder
· 4-6 weeks
Media blasting · Surface finishing
AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.
- ✓ Automated deburr, smooth and clean for metal and plastic parts
- ✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
- ✓ Lead time: 5–8 weeks — built to order · install + training included
- ✓ Starter consumable included — 25 L of finishing media, ready to run out of the box
From $32460
Add to cart
On backorder
· Lead time: 5–8 weeks — built to order. Install and operator training included.
Other Equipment
Nexa3D Wash+Cure
The Wash+Cure is tailored for washing and post-curing the parts printed on the XiP printer. It's is an all-in-one, automated post-processing system.
From $636
Add to cart
In stock
Accessories APSX
SAS SS-300 Fume Extraction
It is used to capture and filter of airborne contaminants produced from a variety of applications.
From $3000
Add to cart
In stock
Accessories APSX
PINS FOR APSX-PIM BLANK MOLD
Stainless steel dowel to be used to on molds for APSX-PIM. 4 pins are required per mold.
From $7
Add to cart
In stock
Plastic Injection Molding Machine
Nylon Natural Pellets 101L - 2 lbs
General-Purpose, Lubricated Nylon 66 for Tough, Precision-Molded Parts.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $80
Add to cart
In stock
Plastic Injection Molding Machine
Polycarbonate (PC) Natural Pellets HF1130 - 2 lbs
UV-stabilized and has good clarity, heat resistance and dimensional stability.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $80
Add to cart
In stock
Accessories APSX
APSX-PIM STAND
A steel leg table for the APSX-PIM injection machine.
From $550
Add to cart
In stock
From production teams running SAS SS-400 Fume Extraction
Unedited feedback from teams who bought and run SAS SS-400 Fume Extraction.
★★★★★
We bridged a 3D-printed prototype to a 500-part run on the bench machine. Cycle times were exactly as quoted.
MK
Marcus K.
Process Engineer · Consumer Products
★★★★★
Asked about tooling for a small insert. An engineer walked us through it and ran a trial shot, no sales pitch.
PS
Priya S.
R&D Lead · Medical Devices
★★★★★
Install included validated parameters for our resin. First parts were in spec — minimal trial-and-error.
DR
Diego R.
Production Lead · Automotive
Place your order, or talk to an engineer first
Order SAS SS-400 Fume Extraction direct, or talk to materials engineer