In stock
Sygnis Stainless Steel Dispensing Tips for F-NIS DIW – Electropolished, 0.20–1.50 mm | Pack of 20
Electropolished stainless-steel dispensing tips for the Sygnis F-NIS direct-ink-writing (DIW) system — free of silicones and chlorides for sterile and fine work, with color-coded diameters from 0.20 to 1.50 mm for precise, consistent flow.
- ✓ Electropolished cannula — accurate, consistent extrusion
- ✓ Six color-coded bores 0.20–1.50 mm · luer-lock fit · 25.4 mm length
- ✓ In US stock · sold in packs of 20 · ships in 2 business days
What These Dispensing Tips Do
The stainless-steel dispensing tips are free of riddles, silicones and chlorides, which makes them a good fit for sterile applications. At the smaller bores they suit low-viscosity fluid extrusion, and the electropolished cannula keeps flow accurate and consistent. Different inner diameters are color-coded so operators can select the right tip at a glance.
Specifications
- System: Sygnis F-NIS DIW dispensing (luer-lock fit)
- Material: Polypropylene hub with an electropolished stainless-steel cannula
- Length: 25.4 mm / 1.00 in
- Bore: Color-coded diameters — 0.20, 0.41, 0.60, 0.84, 1.20 and 1.50 mm (select the option you need)
- Free of: Silicones and chlorides — suitable for sterile applications
- Sold: In packs of 20
Why Source Through Additive Plus
Kept in US inventory and shipped in two business days, with no overseas lead time on consumables. Not sure which diameter suits your paste or ink? Our team helps you match bore size to viscosity and flow rate. Ordering for a department or need a purchase order? Contact us.
| Brand | Sygnis |
| Technology | DIW |
| Diameter | 0.20 mm / 0.01 in, 0.41 mm / 0.016 in, 0.60 mm / 0.024 in, 0.84 mm / 0.033 in, 1.20 mm / 0.047 in, 1.50 mm / 0.059 in |
| Material | Polypropylene, Stainless Steel |
| Quantity | 20 |
Complete the workflow
A simple, reliable desktop DIW platform for printing silicones, ceramic pastes and photopolymers — ideal for proof-of-concept and proprietary-material R&D.
- 230×150×150 mm tempered-glass bed, heated to 120 °C · pneumatic extrusion to 4 bar
- Prints any one-component paste or semi-liquid — silicones, ceramics, resins, conductive pastes
- Five versions — add UV (365/405 nm), a heated printhead, a cooled platform or a second head
From $11,705 · eight configurations. Built to order — pick your version and place the order, or talk to an engineer first. Versions D and E are priced on request. NDA standard.
Other products teams run alongside Sygnis Stainless Steel Dispensing Tips for F-NIS DIW – Electropolished, 0.20–1.50 mm | Pack of 20
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
September special: $448 (regular $527.40) — valid through September 30, 2026. Wash and cure station for post-processing parts printed on the Nexa3D XiP. Ordered on demand — availability and lead time are confirmed at order. This SKU is being discontinued by the supplier, so the offer runs while supplier stock lasts.
Made to order
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement light-engine protective glass for Nexa3D NXE printers with the LE5 light engine (NX Pro generation). The glass shields the projector optics from resin and debris; a scratched or fouled pane scatters light and softens prints, so swapping it restores clean projection.
- ✓ Protective glass for the NXE LE5 / NX Pro light engine
- ✓ Match your light-engine generation before ordering (LE1–LE4 uses a different kit)
- ✓ Genuine Nexa3D kit (P/N 12018) · currently on backorder — contact us for lead time
Made to order
· Currently on backorder — contact us for lead time
Replacement bubbler for the Zetasinter debinding and sintering furnace.
- ✔ Genuine Zetamix by Nanoe component
- ✔ Consumable part — keep a spare to avoid furnace downtime
- ✔ Shipped from California, invoiced in USD
In stock
· Ships from California · 10–20 business days
Direct Pellet Extrusion (DPE) head for the 3DCeram M.A.T. — print ceramic & metal pellets at lower feedstock cost than filament.
- ✓ Screw Ø8 mm · 270 °C max · 0.8 mm nozzle
- ✓ Lower cost per part vs. filament, higher throughput
- ✓ Installs on your M.A.T. — US support & training
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which diameters are available and how do I choose?
What are the tips made of and are they suitable for sterile work?
How are the dispensing tips sold?
Place your order, or talk to an engineer first
Order Sygnis Stainless Steel Dispensing Tips for F-NIS DIW – Electropolished, 0.20–1.50 mm | Pack of 20 direct, or talk to materials engineer