Made to order
Sygnis Heat Module for F-NIS 23151 – Heated 10 ml Head, Version B to C
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.
- Heated 10 ml cartridge head, up to 60 °C
- Upgrades F-NIS Version B to Version C — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
$1,535
Run warm materials, on your F-NIS
Heats the cartridge to 60 °C
The Heat Module warms the 10 ml cartridge to 60 °C so the Sygnis F-NIS can print temperature-sensitive pastes and inks at the right viscosity — a self-install upgrade from version B to C.
Supported by the F-NIS team
Additive Plus supplies and runs the Sygnis F-NIS platform. Genuine parts, plus engineers who can talk through the B-to-C upgrade.
- Adds the heated printhead for 10 ml cartridges, up to 60 °C
- Turns an F-NIS Version B into Version C — you fit it yourself
- Heating is switched from the post-processor settings, written into the G-code
- Online support from the Additive Plus team and Sygnis while you fit it
What it is and what it fits
The Heat Module is the Sygnis heated printhead for the Sygnis F-NIS 23151. It holds a 10 ml material barrel and warms it to as much as 60 °C. Sygnis offers it as the owner upgrade from Version B to Version C.
Heating helps when a material’s flow depends on its temperature — a paste that is too stiff to extrude at room temperature prints evenly when warm — and Sygnis also names it for initial drying of a material. You switch heating on in the post-processor, which writes it into the G-code. The 10 ml barrel uses its own pneumatic adapter, and the heated head is interchangeable with the standard 30/55 ml head, so your other work carries on as before.
Specifications
| Product | Heat Module (heated printhead) for Sygnis F-NIS 23151 |
| Cartridge | 10 ml syringe barrel |
| Max. temperature | 60 °C |
| Control | F-NIS post-processor (heated printhead option) |
| Installation | Self-installed; online support |
| Warranty | 12 months, Sygnis; heater and thermocouple covered for the first 300 hours of printing |
| Price | $1,535 |
| Lead time | 2–3 weeks |
Which F-NIS it fits
| Version B | Yes — this module makes it a Version C |
| Version A | Sygnis lists the upgrade path as B → C; add the UV Module first |
| Version C, D and E | Already fitted with a heated 10 ml head |
The heated head runs 10 ml barrels: order 10 ml syringe barrels, 10 ml syringe barrel pistons, 10 ml barrel end caps and stainless dispensing tips with it. For Version A, the UV Module ($1,150) comes first.
Availability, payment and delivery
What usually stops people — and the honest answer
| Brand | Sygnis |
Other products teams run alongside Sygnis Heat Module for F-NIS 23151 – Heated 10 ml Head, Version B to C
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
Replacement alumina tube for the earlier Zetasinter tubular furnace.
- ✔ Fits the previous-generation Zetasinter tubular furnace, not the 4L
- ✔ Genuine Zetamix by Nanoe component
- ✔ Confirm your furnace generation before ordering — we will check it with you
In stock
· Ships from California · 10–20 business days
Replacement activated-carbon cartridge for the Nexa3D XiP AiR air-filtration accessory. It captures resin odour and VOCs from the XiP's exhaust, so a saturated cartridge should be swapped to keep the AiR unit filtering effectively.
- ✓ Activated-carbon odour / VOC capture cartridge
- ✓ Fits the Nexa3D XiP AiR filtration unit
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Transparent luer-lock syringe barrels for the Sygnis F-NIS 23151 silicone & paste 3D printer — the material cartridges you fill, lock in the printhead and print from.
- Pack of 20 · from $55
- 10 ml, 30 ml or 55 ml — one size per pack
- Luer-lock thread for tips and tip caps
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Electropolished stainless dispensing tips for the Sygnis F-NIS 23151 — six color-coded diameters from 0.20 to 1.50 mm, luer-lock, free of silicones and chlorides.
- Pack of 20 of one diameter · $42
- 0.20, 0.41, 0.60, 0.84, 1.20 or 1.50 mm
- Luer-lock — fits every F-NIS barrel
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.
- Two pneumatic heads, independent pressure for each cartridge
- Independent heating up to 60 °C for each cartridge
- Shared UV 365/405 nm · 120 °C glass platform kept
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
Made to order
· Ships in 2–3 weeks
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machine is the Heat Module for?
What does the Heat Module do?
Can I install it myself?
How much does the Heat Module cost?
Which consumables does the heated head use?
How long does delivery take, and what is the warranty?
Can it heat above 60 °C?
Can I order with a purchase order?
Place your order, or talk to an engineer first
Order Sygnis Heat Module for F-NIS 23151 – Heated 10 ml Head, Version B to C direct, or talk to materials engineer