In stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
CreatBot Ultra PA Filament - High-Temperature Nylon - 1kg
High-temperature nylon (PA) filament for FDM 3D printing — tough, wear- and chemical-resistant, with 133 MPa flexural strength and heat tolerance well beyond ABS, for functional gears, brackets, and end-use engineering parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
$65
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
Why engineers choose CreatBot Ultra PA Filament
Four things engineers check before standardizing on an engineering nylon.
Tough & fatigue-resistant
Nylon absorbs repeated load and impact without cracking — 86 MPa tensile and 133 MPa flexural strength make it a workhorse for living hinges, gears, and parts that flex in service.
Wear & chemical resistant
Low friction with strong resistance to oils, greases, and many solvents — the reason nylon is standard for gears, bushings, and parts exposed to fuels and lubricants.
±0.02mm diameter tolerance
Tight, consistent diameter means steady extrusion — no mid-print under-extrusion from a loose spot or clogs from a tight one.
Engineering-grade heat tolerance
A high-temperature nylon grade that holds strength in warm service where PLA and PETG soften — for functional parts near motors, drivetrains, and warm enclosures.
How we ship it
Every spool of CreatBot Ultra PA Filament leaves Gardena, CA the same way.
Print profile confirmed
Nozzle and bed temperatures verified on a CreatBot F430 before the spool is listed — not copied from a generic nylon spec sheet.
Sealed with desiccant
Vacuum-bagged with the original desiccant pack — essential for nylon, which absorbs moisture faster than any other filament.
Ships from L.A. stock
In stock at our Gardena facility — 1–2 business day dispatch, datasheet included in the box.
Print compatibility
Runs on an FDM/FFF printer with a heated bed to 90°C and a nozzle rated to 300°C; an enclosure improves results on larger parts. Nylon is strongly hygroscopic — dry the spool before printing, or layers come out weak, rough, and stringy. Full mechanical and thermal property values (tested to ISO 527, ISO 178, ISO 75, and ISO 1183) are listed in the Specifications tab below.
Recommended print settings
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 280°C – 300°C |
| Build plate temperature | 70°C – 90°C |
| Chamber / enclosure | Recommended |
| Print speed | 30 – 50 mm/s |
| Cooling fan | Off or low |
| Nozzle type | Hardened steel or brass · dry before printing |
Typical applications
Where engineering and production teams run CreatBot Ultra PA Filament.
Storage & handling
Store CreatBot Ultra PA Filament sealed with the desiccant, and dry it before every print — nylon absorbs moisture faster than any other filament. A wet spool prints rough and weak; a dry box during printing keeps quality consistent, especially in humid environments.
Not sure Ultra PA is the right fit?
Three reasons teams pick a different CreatBot filament — tap the closest match.
Need stiffness at lower costCreatBot Ultra PA GF FilamentView filament →
Need easier, cheaper functional partsCreatBot ABS FilamentView filament →
Why source through Additive Plus
- Validated print profile — nozzle and bed temperatures confirmed on a CreatBot F430, not copied from a generic spec sheet.
- In-stock at our Gardena, CA facility — ships in 1–2 business days, datasheet in every box.
- A materials engineer on the line for drying, wear, or compatibility questions — sub-4h reply, NDA standard.
- Custom variants on request — filled, flame-retardant, or color-matched nylon spools qualified for your application.
| Brand | CreatBot |
| Printing Materials | Plastic Filaments |
| Solid Density g/cm3 | 1.21 |
| Tensile Strength | 86 |
| Tensile Modulus (MPa) | 3172 |
| Flexural Strength (MPA) | 133 |
| Flexural Modulus (MPa) | 3513 |
| Deflection Temperature | 79 |
| Glass Transition Temperature | 84 |
| Printer | CreatBot F430 |
| Nozzle Temperature | 300°C |
| Bed Temperature | 80°C |
| Printing Speed | 40mm/s |
| Infill | 100%，+/- 45° |
| Nozzle size | 0.4mm |
| Layer thickness | 0.2mm |
| Plastic Class | Engineering |
| Reinforcement | Unfilled |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We source and qualify. Custom variants on request.
Need a filled, flame-retardant, or color-matched filament, or a profile for a printer we don't list yet? Our materials team qualifies the spool and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside CreatBot Ultra PA Filament - High-Temperature Nylon - 1kg
Structural PA6 nylon pellets qualified for large-format additive manufacturing (LFAM) — high strength, wear resistance, and glass-fiber grades for load-bearing tooling at pellet cost.
- ✓ High strength and wear resistance — glass-fiber grades for structural loads
- ✓ Ships dry with a lot datasheet + a strict drying and extrusion schedule
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
The SLM 280 SS304 Build Platform is a precision-ground stainless steel build plate engineered for reliable LPBF production. Manufactured from high-grade 304 stainless steel and designed as a direct OEM-compatible solution, this SLM 280 metal build plate delivers excellent flatness, thermal stability, and repeatable first-layer performance for industrial additive manufacturing.
Need a custom steel build platform for another printer or alternative thickness? Request a custom quote — we manufacture precision stainless steel and specialty alloy build plates for most industrial LPBF systems.In stock
· Express 2–3 wks · Standard 6–8 wks
xPRO410 is a rigid, general-purpose LSPc photopolymer built on Henkel Loctite® PRO410 chemistry — supplied in a 1.5 kg smart cartridge that drops straight into the Nexa3D XiP and XiP Pro.
- ✓ Rigid general-purpose resin — 41 MPa tensile, Shore D 79
- ✓ Dimensional accuracy within 0.2% after post-cure
- ✓ 1.5 kg smart cartridge for XiP / XiP Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
- ✔ High toughness and flexural strength, wear- and corrosion-resistant
- ✔ Print → debind → sinter to dense zirconia on a desktop FFF machine
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
xFLEX475-Black is a medium-soft, rubber-like elastomer — 150% elongation at failure, up to 50% energy return, solvent-resistant.
- ✓ Resilient with snap-back and tear resistance — pipes and manifolds, handles, seals, gaskets, midsoles
- ✓ 150% elongation at failure, up to 50% energy return, resistant to most solvents
- ✓ Genuine Nexa3D resin for the XiP · 1.5 kg cartridge · not in stock, available on request
Out of stock
· Not in stock — available on request
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 10 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 10 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.Place your order, or talk to an engineer first
Order CreatBot Ultra PA Filament - High-Temperature Nylon - 1kg direct, or talk to materials engineer