In stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
CreatBot Ultra PA GF - Glass Fiber Nylon Filament - 1kg
Glass-fiber-reinforced high-temperature nylon filament for FDM 3D printing — high strength (88 MPa tensile) and stiffness with a heat-deflection temperature up to 135°C, tougher and less brittle than carbon-fiber grades, for demanding functional parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
$93
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
Why engineers choose CreatBot Ultra PA GF Filament
Four things engineers check before standardizing on a glass-fiber nylon.
High strength & stiffness
88 MPa tensile and 141 MPa flexural strength with a 4852 MPa flexural modulus — rigid, strong parts for structural and load-bearing use.
Heat-resistant to 135°C HDT
A heat-deflection temperature up to 135°C and a 147°C glass transition keep parts stable in hot service, well beyond unfilled nylon.
±0.02mm diameter tolerance
Tight, consistent diameter means steady extrusion — no mid-print under-extrusion from a loose spot or clogs from a tight one.
Tougher than carbon fiber
Glass fiber reinforces without the brittleness of carbon — parts absorb more impact before failing, a better balance when stiffness and toughness both matter. Glass is abrasive; run a hardened steel nozzle.
How we ship it
Every spool of CreatBot Ultra PA GF Filament leaves Gardena, CA the same way.
Print profile confirmed
Nozzle and bed temperatures verified on a CreatBot F430 before the spool is listed — not copied from a generic spec sheet.
Sealed with desiccant
Vacuum-bagged with the original desiccant pack — critical for glass-fiber nylon, which absorbs moisture readily.
Ships from L.A. stock
In stock at our Gardena facility — 1–2 business day dispatch, datasheet included in the box.
Print compatibility
Requires an FDM/FFF printer with a nozzle rated to 300°C and a hardened steel nozzle (glass fiber is abrasive to brass); an enclosure improves layer strength on larger parts. Nylon is strongly hygroscopic — dry the spool before printing. Full mechanical and thermal property values (tested to ISO 527, ISO 178, ISO 75, and ISO 1183) are listed in the Specifications tab below.
Recommended print settings
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | 290°C – 310°C |
| Build plate temperature | 70°C – 90°C |
| Chamber / enclosure | Recommended |
| Print speed | 40 – 45 mm/s |
| Cooling fan | Off or low |
| Nozzle type | Hardened steel (required — abrasive) |
Typical applications
Where engineering and production teams run CreatBot Ultra PA GF Filament.
Storage & handling
Store CreatBot Ultra PA GF Filament sealed with the desiccant, and dry it before every print — glass-fiber nylon absorbs moisture readily and prints rough and weak when wet. Use a dry box during printing, especially in humid environments.
Not sure Ultra PA GF is the right fit?
Three reasons teams pick a different CreatBot filament — tap the closest match.
Need unfilled toughnessCreatBot Ultra PA FilamentView filament →
Need lower-temperature stiffnessCreatBot PET CF FilamentView filament →
Why source through Additive Plus
- Validated print profile — nozzle and bed temperatures confirmed on a CreatBot F430, not copied from a generic spec sheet.
- In-stock at our Gardena, CA facility — ships in 1–2 business days, datasheet in every box.
- A materials engineer on the line for drying, nozzle-wear, or compatibility questions — sub-4h reply, NDA standard.
- Custom variants on request — specialty composite nylon grades qualified for your application.
| Brand | CreatBot |
| Printing Materials | Plastic Filaments |
| Solid Density g/cm3 | 1.16 |
| Tensile Strength | 88 |
| Tensile Modulus (MPa) | 4833 |
| Flexural Strength (MPA) | 141 |
| Flexural Modulus (MPa) | 4852 |
| Deflection Temperature | 101, 135 |
| Glass Transition Temperature | 147 |
| Printer | CreatBot F430 |
| Nozzle Temperature | 300°C |
| Bed Temperature | 80°C |
| Printing Speed | 40mm/s, 45mm/s |
| Infill | 100%，+/- 45° |
| Nozzle size | 0.4mm |
| Layer thickness | 0.2mm |
| Plastic Class | Engineering |
| Reinforcement | Glass fiber |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We source and qualify. Custom variants on request.
Need a filled, flame-retardant, or color-matched filament, or a profile for a printer we don't list yet? Our materials team qualifies the spool and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside CreatBot Ultra PA GF - Glass Fiber Nylon Filament - 1kg
PP-like black resin: high elongation/impact for end-use jigs, housings & parts.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
In stock
xCERAMIC3280 is a white ceramic-composite resin from Nexa3D and BASF — rigid, high heat-deflection, with a true ceramic look and feel.
- ✓ High rigidity and heat-deflection temperature for wind-tunnel models, housings, and enclosures
- ✓ Low viscosity means fast prints with fine detail and strong mechanical properties
- ✓ Genuine Nexa3D / BASF resin for NXE-series printers · 5 L · ships from US stock in 2 business days
In stock
· 2 Business Days
xPP405 Black is a polypropylene-like LSPc photopolymer — tough and semi-rigid, with roughly the stiffness of molded unfilled polypropylene and about 100% elongation at break.
- ✓ PP-like toughness — 100% elongation, 51 J/m notched Izod
- ✓ UV and heat-ageing tested; UL94 HB at 2 mm
- ✓ 5 kg container for NXE 400 / 400Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
Nexa3D xCE-White is a high-stiffness, high-temperature LSPc engineering resin made with Henkel LOCTITE — a single-cure polymer with the flexural strength normally seen only in dual-cure cyanate esters, supplied in a 5 kg container.
- ✓ 135 MPa flexural strength, 3250 MPa flexural modulus, Shore D 89
- ✓ 128 °C glass transition by DMA (E″)
- ✓ 5 kg sealed container with validated LSPc profiles for NXE 400/400Pro, XiP and XiP Pro
In stock
· Ships in 1–2 business days from US stock.
In stock
· 2 Business Days
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
Cyanate-ester-like LSPc resin for stiff, heat-resistant functional parts and injection-molding inserts — 1.5 kg bottle.
- ✓ 135 MPa flexural strength, 3250 MPa flexural modulus
- ✓ 128 °C glass transition (DMA, E″)
- ✓ Runs on XiP, XiP Pro and NXE 400/400Pro
In stock
· Ships in 1–2 business days from US stock.
PETG filament for FDM 3D printing — the tough, low-warp all-rounder that prints as easily as PLA but takes impact and chemical exposure like a functional part, for brackets, enclosures, and water-contact fixtures.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
Place your order, or talk to an engineer first
Order CreatBot Ultra PA GF - Glass Fiber Nylon Filament - 1kg direct, or talk to materials engineer