In stock
- Validated FDM profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
FibreSeek X-CGF Continuous Glass Fiber — 500 m spool for FibreSeeker 3
- 1K continuous glass fiber for FibreSeeker 3 co-extrusion
- Up to 714 MPa tensile strength, balanced mechanical performance
- Electrically insulating — for non-conductive structures
$50
What your process engineer actually checks
Tight diameter, dry, jam-free
Every spool ships with a datasheet covering diameter tolerance, moisture, and a validated print profile for the systems we sell, so feeds stay consistent and parts hold dimension. Load the profile and print.
A materials engineer on the line
Questions on diameter tolerance, moisture, layer adhesion, or warping? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA on request.
FibreSeek X-CGF is the continuous glass fiber for the FibreSeeker 3 CFC nozzle — a cost-effective reinforcement compatible with multiple CFC matrix materials, and electrically insulating where carbon would conduct.
- Fiber: 1K continuous glass
- Composite tensile strength: up to 714 MPa (manufacturer data)
- Electrically insulating
- Spool: 500 m
For the FibreSeeker 3 continuous-fiber 3D printer.
In stock in the US — ships from US stock. Exact ship date confirmed by email after you order.
We source and qualify. Custom variants on request.
Need a filled, flame-retardant, or color-matched filament, or a profile for a printer we don't list yet? Our materials team qualifies the spool and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside FibreSeek X-CGF Continuous Glass Fiber — 500 m spool for FibreSeeker 3
- PETG matrix plastic for FibreSeeker 3 — plain FFF or with continuous fiber
- 1.75 mm, black
In stock
· In stock · ships from the US
Polycarbonate (PC) filament for FDM 3D printing — the highest impact strength and heat resistance in the standard filament range, with a 135°C heat-deflection temperature for structural parts, housings, and functional prototypes that run hot.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
- ✔ Electrically insulating, very hard and wear-resistant, stable at high temperatures
- ✔ Print → debind → sinter to dense alumina — no powder bed, no special printer
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
- ✓ ESA/ESTEC-verified: 423 MPa flexural strength, 82 W/m-K thermal conductivity
- ✓ Solid-state sintered to 2100°C — dense, chemically inert, no powder bed
- ✓ Qualified for the 3DCeram M.A.T. platform — quote-based pricing, request a quote
In stock
· Contact for lead time
- ✔ High strength and hardness (precipitation-hardenable), good corrosion resistance
- ✔ Print → debind → sinter to dense metal — ideal for functional and tooling parts
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
· Ships in 1–2 business days
Print ultra-high-temperature ceramic parts on a standard FFF printer. A ZrB2–SiC–B4C composite formulated for pressureless sintering — built for aerospace and defence conditions.
- ✔ ZrB2 – SiC – B4C composite · pressureless sintering, no hot press
- ✔ Very high temperature and oxidation resistance
- ✔ Genuine Zetamix by Nanoe · 500 g spool · 1.75 mm
In stock
· Ships from California · 10–20 business days
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 10 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 10 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
ASA filament for FDM 3D printing — ABS-grade strength with the UV, weather, and color stability sunlight doesn't fade, plus a 90°C HDT for outdoor housings, automotive exterior parts, and signage.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
What our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Place your order, or talk to an engineer first
Order FibreSeek X-CGF Continuous Glass Fiber — 500 m spool for FibreSeeker 3 direct, or talk to materials engineer