All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 161–168 of 500 Items

QATM Qness 250 / 750 / 3000 M EVO Macro Hardness Tester – Brinell/Vickers/Rockwell/Knoop | 0.3–3000 kgf

Manual, semi-automatic macro hardness tester from QATM — Brinell, Vickers, Rockwell and Knoop across the 250, 750 and 3000 kgf classes, from 0.3 to 3000 kgf under electronic closed-loop force control.

Get quote

Made to order

· Lead time: 6–10 weeks — configured to order

QATM Qness 250/750/3000 A+ EVO Macro Hardness Tester – Vickers/Brinell/Rockwell | 0.3–3000 kgf

Fully automated macro and universal hardness tester in three force classes — 250, 750 and 3000 kgf — running Vickers, Brinell and Rockwell from 0.3 up to 3000 kgf, with a motorized XY stage, full-table sample-image camera and automatic test-head height for unmanned cycles.

✓ Three macro methods on one automated frame, conformant to ISO 6506 / 6507 / 6508
✓ Qpix Control2 software, XLED Brinell lenses and DAkkS-certified indenters
✓ Install, calibration and operator training included · lead time 6–10 weeks, configured to order

Get quote

Made to order

· Lead time: 6–10 weeks — configured to order

QATM Qness 250/750/3000 CS/C EVO Macro Hardness Tester – Vickers/Brinell/Rockwell/Knoop | 0.3–3000 kgf

C-shaped-frame macro and universal hardness tester in three force classes — 250, 750 and 3000 kgf — running Vickers, Brinell, Knoop and Rockwell from 0.3 up to 3000 kgf with fully automatic electronic force control and short cycle times.

✓ Four macro methods on one C-frame, conformant to ISO 6506 / 6507 / 6508
✓ Qpix T2 software (Qpix Control2 M optional), XLED Brinell lenses and DAkkS-certified indenters
✓ Install, calibration and operator training included · lead time 6–10 weeks, configured to order

Get quote

Made to order

· Lead time: 6–10 weeks — configured to order

QATM Qness 250/750/3000 E EVO Macro Hardness Tester – Vickers/Brinell/Rockwell/Knoop | 0.3–3000 kgf

Economical universal macro hardness tester — Vickers, Brinell, Rockwell and Knoop across three force classes (250, 750 and 3000 kgf), from 0.3 up to 3000 kgf under electronic force control, with motorized dynamic height adjustment and XLED optics.

✓ Four macro methods on one universal frame, conformant to ISO 6506 / 6507 / 6508
✓ Qpix T2 software (Qpix Control2 M optional), XLED Brinell lenses and DAkkS-certified indenters
✓ Install, calibration and operator training included · lead time 6–10 weeks, configured to order

Get quote

Made to order

· Lead time: 6–10 weeks — configured to order

QATM Qness 60 A+ EVO Micro Hardness Tester – Vickers/Knoop/Brinell/Rockwell | 0.25 gf–62.5 kgf

Fully automated micro and low-macro hardness tester — Vickers, Knoop, Brinell and Rockwell across 0.25 gf – 62.5 kgf, with an 8-position motorized turret, microscope-grade optics and glass-scale positioning to ±0.2 µm.

✓ Four methods on one automated frame, conformant to ISO 6507 / ASTM E384
✓ Qpix Control2 software, DAkkS-certified Vickers indenter and HQ 5×/20×/50× lenses included
✓ Install, calibration and operator training included · lead time 6–10 weeks, configured to order

Get quote

Made to order

· Lead time: 6–10 weeks — configured to order

QATM Qpix Control2 Hardness Testing Software – CHD/Weld Analysis, Edge Recognition & Reporting

Advanced PC software for QATM Qness hardness testers — machine control, automated indentation evaluation and audit-ready reporting, with CHD/SHD/NHD case-depth analysis, weld and HAZ mapping, edge recognition and panorama imaging.

✓ Automated case-hardening-depth and weld evaluation, standard-referenced (ISO 6507 / 6506 / 6508)
✓ Edge recognition, template and test-block management, Qness Calibration Manager
✓ Licensed, installed and set up with your Qness system — configured to order

Get quote

Made to order

· Licensed with your Qness system — request configuration and lead time

QATM Qpix Control2 M/R Hardness Testing Software – Manual & Rockwell Editions

The Qpix Control2 software platform for manual, semi-automatic and Rockwell QATM Qness hardness testers — the same environment across the whole Qness range, so a mixed fleet runs one workflow with no extra operator training.

✓ Control2 M for manual and semi-automatic testers; Control2 R for Rockwell (ISO 6508 / ASTM E18)
✓ Clearly structured batch management and reusable test-project templates
✓ Licensed, installed and set up across your Qness fleet — configured to order

Get quote

Made to order

· Licensed with your Qness systems — request configuration and lead time

QATM Qpix T2 Hardness Testing Software – Row Tests, Reporting & Data Export

On-device software for QATM Qness hardness testers — programmed row tests, one-button protocols and data export, built for serial testing and in-line integration.

✓ Predefined row-test programs with manual slide, micrometre spindle and position feedback
✓ Export to PDF / XLSX / DOCX / XML / CSV and result release over RS232 or Ethernet
✓ Dynamic height with the Qness E frames and a Calibration Manager for audit-ready records

Get quote

Made to order

· Licensed with your Qness system — request configuration and lead time

Equipment

Have a CAD? Have a quote in 24h.