All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 313–320 of 500 Items

Farsoon Technologies · SLS

Farsoon Flight® 403P-2 SLS 3D Printer – Dual-Fiber-Laser Industrial Production | 400×400×450 mm

The highest-throughput system in the 403 class: two 300 W fiber lasers scanning in parallel push build rates up to 9 L/h on a 15.7×15.7×17.7 in / 400×400×450 mm build (up to 540 mm tall). Built for serious polymer production, running high-performance nylons and TPU with fully open parameters. Sold, installed and supported in the US by Additive Plus.

Dual 300 W fiber lasers — up to 9 L/h, the fastest 403-class throughput.
High-performance polymers — PA-F nylons, glass-bead, LUVOSINT TPU; chamber to 220 °C.
Lead time: configured to order — US install, training & validated profiles from California.

Build 15.7x15.7x17.7 in / 400x400x450 mm, 15.7x15.7x21.3 in / 400x400x540 mm

Prints FS3201PA-F, FS3300PA-F, FS3401GB-F, LUVOSINT® TPU X92A-1064 WT

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation, training and process support included from California.

Farsoon Technologies · Metal LPBF

Farsoon FS121M LPBF Metal 3D Printer – Compact Frame for Dental and R&D | 4.7×4.7×3.9 in / 120×120×100 mm

The Farsoon FS121M is a metal LPBF 3D printer with a 4.7×4.7×3.9 in / 120×120×100 mm build envelope, running a single 300 W or 500 W fiber laser with a dynamic focusing system.

✓ 4.7×4.7×3.9 in — build cylinder
✓ 4.7×4.7×3.9 in / 120×120×100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 120×120×100 mm (4.7×4.7×3.9 in)

Prints 17-4PH, 316L, AlSi10Mg, CoCrMoW, Cu, CuSn10, HX, Ti-6Al-4V, 18Ni300, CoCrMo

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS191M LPBF Metal 3D Printer – Cylindrical Build with Heated Plate | ø7.5×7.8 in / ø191×199 mm

The Farsoon FS191M is a metal LPBF 3D printer with a ø7.5×7.8 in / ø191×199 mm build envelope, running a single 500 W fiber laser.

✓ ø7.5×7.8 in — build cylinder
✓ ø7.5×7.8 in / ø191×199 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build ø191×199 mm (ø7.5×7.8 in)

Prints 316L, AlSi10Mg, Ti-6Al-4V

Get quote

Made to order

· Built to order

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Fab DED Metal 3D Printer – 5-Axis DMT Production | 800×1000×700 mm

The InssTek MX-Fab is an all-in-one 5-axis DED metal 3D printer with a 31×39×28 in / 800×1000×700 mm work envelope — a 1,000 W (up to 2,000 W) ytterbium fiber laser, DMT closed-loop melt-pool control, and up to six powder feeders for multi-material and functionally graded parts.

✔ 5-axis DED with real-time DMT melt-pool feedback — dense, near-net-shape metal
✔ 30+ qualified alloys: Ti, Ni superalloys, stainless & tool steel, CoCr, Cu — multi-material in one build
✔ Fabrication, cladding, and repair on one platform
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 31.5×39.4×27.6 in / 800×1000×700 mm

Prints Cobalt alloys, Copper alloys, Nickel superalloys, Stainless & tool steels, Titanium

Get quote

Made to order

· Quote on request

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Lab Compact DED Metal 3D Printer – DMT Alloy Development | 150×150×150 mm

The InssTek MX-Lab is a compact, benchtop-scale DED metal 3D printer for materials research — a 5.9×5.9×5.9 in / 150×150×150 mm envelope, a six-hopper powder feeder blending up to six ratios at once, and the same DMT closed-loop melt-pool control as InssTek’s production systems.

✔ Six-hopper Hexa feeder, 0.03–2.0 g/min — high-entropy alloys & functionally graded materials
✔ DMT closed-loop control — dense, repeatable coupons for trustworthy data
✔ Argon >99.999% at ≤50 ppm O₂ — reactive-alloy research
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 5.9×5.9×5.9 in / 150×150×150 mm

Prints Cobalt alloys, Copper alloys, High-entropy & graded alloys, Nickel superalloys, Stainless & tool steels, Titanium

Get quote

Made to order

· Quote on request

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Med Medical DED Metal 3D Printer – Porous Titanium Implant Coating | 300×300×230 mm

The InssTek MX-Med is a DED metal 3D printer dedicated to medical work — a low-power 100 W laser and 200 µm beam that apply uniform porous titanium coatings to orthopedic implants for osseointegration, driven by DMT closed-loop melt-pool control across an 11.8×11.8×9.1 in / 300×300×230 mm envelope.

✔ Fine 100 W / 200 µm beam — delicate porous coatings without over-melting the substrate
✔ DMT closed-loop control — uniform, repeatable titanium layers
✔ Multi-axis motion follows curved implant geometry; argon ≤50 ppm O₂
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 11.8×11.8×9.1 in / 300×300×230 mm

Prints Titanium (CP Ti, Ti-6Al-4V)

Get quote

Made to order

· Quote on request

Farsoon Technologies · Metal LPBF

Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm

The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.

✓ 2×500 W — dual fiber lasers
✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×230×300 mm (16.7×9.1×11.8 in)

Prints 316L, 420, AlSi10Mg, ST1, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS273M LPBF Metal 3D Printer – Wide Alloy Range | 10.8×10.8×14.0 in / 275×275×355 mm

The Farsoon FS273M is a metal LPBF 3D printer with a 10.8×10.8×14.0 in / 275×275×355 mm build envelope, running one or two 500 W lasers (FS273M / FS273M-2).

✓ 10.8×10.8×14.0 in — build envelope
✓ 10.8×10.8×14.0 in / 275×275×355 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 275×275×355 mm (10.8×10.8×14.0 in)

Prints 316L, 420, AlMgScZr, AlSi10Mg, AlSi7Mg, CuCrZr, H13, HX, IN718, Pure Copper, Ta, TA15, Ti-6Al-4V, W, 18Ni300

Get quote

Made to order

· Built to order

Equipment

Have a CAD? Have a quote in 24h.