All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 321–328 of 500 Items

Farsoon Technologies · Metal LPBF

Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm

The Farsoon FS301M is a metal LPBF 3D printer with a 12.0×12.0×16.1 in / 305×305×410 mm build envelope, running one or two 500 W lasers, each covering the full build area.

✓ 12.0×12.0×16.1 in — build cylinder
✓ 12.0×12.0×16.1 in / 305×305×410 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 305×305×410 mm (12.0×12.0×16.1 in)

Prints 17-4PH, 316L, 420, AlSi10Mg, HAYNES 230, HX, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS350M LPBF Metal 3D Printer – 4×500 W, 4×1000 W or 6×500 W Lasers | 17.1×14.1×15.7 in / 433×358×400 mm

The Farsoon FS350M is a multi-laser LPBF metal 3D printer for medium- to high-volume series production, supplied in 4×500 W, 4×1000 W or 6×500 W laser configurations on the same 17.1×14.1×15.7 in / 433×358×400 mm build cylinder.

✓ Three laser configurations — we supply and support all three
✓ 17.1×14.1×15.7 in / 433×358×400 mm build on a 65 sq ft / 6 m² class footprint
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 433×358×400 mm (17.1×14.1×15.7 in) (Height incl. build plate)

Prints 17-4PH, 316L, AlSi10Mg, ST1, Ti-6Al-4V, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS422M CAMS LPBF Metal 3D Printer – Continuous Production | 16.7×16.7×16.5 in / 425×425×420 mm

The Farsoon FS422M CAMS is a metal LPBF 3D printer with a 16.7×16.7×16.5 in / 425×425×420 mm build envelope, running a single 500 W laser or quad 500 W lasers.

✓ 150 cm³/h — volume build rate
✓ 16.7×16.7×16.5 in / 425×425×420 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×425×420 mm (16.7×16.7×16.5 in)

Prints 316L, AlMgScZr, AlSi10Mg, CuSn10, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS621M LPBF Metal 3D Printer – Four Configurations up to 1.7 m Tall | 24.4×24.4×43.3 in / 620×620×1100 mm

The Farsoon FS621M is a metal LPBF 3D printer with a 24.4×24.4×43.3 in / 620×620×1100 mm build envelope, running four or six lasers at 500 W or 1000 W depending on configuration.

✓ 4 — configurations supplied
✓ 24.4×24.4×43.3 in / 620×620×1100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 620×620×1100 mm (24.4×24.4×43.3 in)

Prints 316L, AlSi10Mg, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS721M LPBF Metal 3D Printer – Up to Eight 1000 W Lasers | 28.3×16.5×16.5 in / 720×420×420 mm

The Farsoon FS721M is a metal LPBF 3D printer with a 28.3×16.5×16.5 in / 720×420×420 mm build envelope, running two or four 500 W lasers, or eight 1000 W lasers.

✓ 8×1000 W — top laser configuration
✓ 28.3×16.5×16.5 in / 720×420×420 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 720×420×420 mm (28.3×16.5×16.5 in)

Prints 316L, AlSi10Mg, HX, IN718, TA15, Ti-6Al-4V, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · SLS

Farsoon FLIGHT® HT1001P Large-Format Fiber SLS 3D Printer – High-Temperature Polymer | 1000×500×450 mm

Large-format, high-temperature fiber-laser SLS system with a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build. Two to four 300 W fiber lasers and a 220 °C chamber run high-performance and glass-filled polymers at production scale, with fully open parameters and a modular build-station architecture. Sold, installed and supported in the US by Additive Plus.

Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
2–4 fiber lasers · 220 °C — high-performance, glass-filled & TPU polymers.
Lead time: configured to order — US install, training & validated profiles from California.

Build 1000×500×450 mm, 39.4×19.7×17.7 in

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.

Farsoon Technologies · SLS

Farsoon HT1001P-2 Large-Format SLS 3D Printer – Dual-CO₂ High-Throughput Polymer | 1000×500×450 mm

Large-format, high-throughput SLS system: dual 100 W CO₂ lasers drive build rates up to 15 L/h across a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build, with a 220 °C chamber for high-performance polymers. Open platform, modular build-station architecture. Sold, installed and supported in the US by Additive Plus.

Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
Dual CO₂ · up to 15 L/h — high-volume production; 220 °C chamber, broad materials.
Lead time: configured to order — US install, training & validated profiles from California.

Build 1000×500×450 mm, 39.4×19.7×17.7 in

Get quote

Made to order

· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.

3DCeram · CERAMIC SLA

Fused Silica 3D Printing Paste

Print leachable fused-silica investment-casting cores on 3DCeram's Ceramaker laser-SLA platform for complex internal casting geometries.

✓ 40% porosity, excellent leachability — cleanly removed after casting
✓ Very low expansion (0.07% max dilatation to 1500 °C) holds core dimension through the pour
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Fused Silica (SiO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

Equipment

Have a CAD? Have a quote in 24h.