All 3D Printing Equipment & Consumables | Additive Plus Industrial Solutions

Showing 49–56 of 639 Items

Carbolite Gero LGP Large General Purpose Industrial Oven – Up to 700°C | 500–13,820 L

Large-format industrial oven with the range's widest choice of size and temperature — 500 to 13,820 L in four grades (250, 425, 625 and 700 °C). Heavy-duty impellers, a 430-grade stainless interior, single/double doors and a 3216CC controller with over-temperature protection, plus AMS2750F (Nadcap)-ready builds.

✓ 500 to 13,820 L — the largest ovens in the range, single or double door
✓ Four temperature grades — 250, 425, 625 and 700 °C
✓ AMS2750F (Nadcap) builds, explosion relief and motorised doors available
✓ Configured to order — lead time on request; install & training included

Get quote

Made to order

· Lead time: configured to order — request current lead time. Large-format install and training included.

Carbolite Gero LHT High-Temperature Laboratory Oven – 400–600°C | 30–120 L

High-temperature laboratory oven in three grades — 400, 500 and 600 °C — and three bench sizes (30, 60, 120 L). A heavy-duty convection fan and low-thermal-mass insulation give fast, uniform heating, and the oven is rated for continuous operation.

✓ Three temperature grades — 400, 500 and 600 °C
✓ Three bench sizes — 30, 60 and 120 L, brushed stainless interior
✓ Rated for continuous operation — R38 PID control
✓ Configured to order — lead time on request; install & support included

Get quote

Made to order

· Lead time: configured to order — request current lead time. Install and support included.

Carbolite Gero PF Fan Convection Laboratory Oven – Up to 300°C | 28–910 L

Fan-convection laboratory oven in six sizes from 28 to 910 L — 300 °C on PF 30–PF 200, 250 °C on the large PF 400/800, with ±5 °C uniformity, a stainless-steel chamber and options for solvent stoving, curing and moisture extraction.

✓ Fan convection to 300 °C — ±5 °C uniformity, rapid heat-up and recovery
✓ Six sizes, 28–910 L — bench-top to floor-standing
✓ Stoving & curing, moisture extraction and variable-speed fan options
✓ Configured to order — lead time on request; install & support included

Get quote

Made to order

· Lead time: configured to order — request current lead time. Install and support included.

Carbolite Gero TLD Rapid Cooling Oven – 400°C | Thermoluminescent Dosimeter Annealing

Rapid-cooling oven for annealing thermoluminescent dosimeters (TLDs) — 400 °C in a compact 3 L chamber with a CC-T1 programmable controller that automatically activates a cooling blower for defined, repeatable cool-down and reproducible dosimeter readings.

✓ Automatic rapid cooling — CC-T1 controller triggers the cooling blower on a set schedule
✓ 400 °C, compact 3 L chamber — sized for TLD chips and small samples
✓ Horizontal forced-air circulation — even heating and cooling
✓ Configured to order — lead time on request; install & support included

Get quote

Made to order

· Lead time: configured to order — request current lead time. Install and support included.

CH Leading · Sand Binder Jetting

CH Leading L121207 Sand Binder-Jetting 3D Printer – Foundry Molds & Cores | 1250×1200×700 mm

The CH Leading L121207 is a large-format sand 3D printer that binder-jets full-size casting molds and cores straight from CAD — a 49.2×47.2×27.6 in / 1250×1200×700 mm forming box, printing up to 180 L/h with no patterns and no tooling. Offered in High-Speed and Plus (AGV, automatic sand recovery and digital-factory) configurations.

✔ 1.25×1.2×0.7 m build box — wide molds and cores in one piece
✔ Plus: 108–180 L/h at ~13 s/layer · High-Speed: 108–180 L/h at ~15 s/layer
✔ Nitrogen-free furan or inorganic binder; onboard AC, sand recovery & mixer
✔ Lead time: configured to order — request a quote for delivery & installation

Build 49.2×47.2×27.6 in / 1250×1200×700 mm

Prints CB sand, Cerabeads (pearl) sand, Ceramic sand, Silica (quartz) sand

Get quote

Made to order

· Lead time: configured to order — request a quote for delivery and installation.

CH Leading · Sand Binder Jetting

CH Leading L181007 Sand Binder-Jetting 3D Printer – Foundry Molds & Cores | 1800×1000×700 mm

The CH Leading L181007 is a large-format sand 3D printer that binder-jets full-size casting molds and cores straight from CAD — a 70.9×39.4×27.6 in / 1800×1000×700 mm forming box, printing up to 216 L/h with no patterns and no tooling. Offered in High-Speed and Plus (AGV, automatic sand recovery and digital-factory) configurations.

✔ 1.8×1.0×0.7 m build box — long molds and cores in one piece
✔ Plus: 129–216 L/h at ~15 s/layer · High-Speed: 102–170 L/h — CAD to sand mold in a day
✔ Nitrogen-free furan or inorganic binder; onboard AC, sand recovery & mixer
✔ Lead time: configured to order — request a quote for delivery & installation

Build 70.9×39.4×27.6 in / 1800×1000×700 mm

Prints CB sand, Cerabeads (pearl) sand, Ceramic sand, Silica (quartz) sand

Get quote

Made to order

· Lead time: configured to order — request a quote for delivery and installation.

CH Leading · Sand Binder Jetting

CH Leading L251510 Sand Binder-Jetting 3D Printer – Foundry Molds & Cores | 2500×1500×1000 mm

The CH Leading L251510 is a large-format sand 3D printer that binder-jets full-size casting molds and cores straight from CAD — a 98.4×59.1×39.4 in / 2500×1500×1000 mm forming box, printing up to 519 L/h with no patterns and no tooling. Offered in High-Speed and Plus (AGV, automatic sand recovery and digital-factory) configurations.

✔ 2.5×1.5×1.0 m build box — the largest in the line, full molds and cores in one piece
✔ Plus: 312–519 L/h at ~13 s/layer · High-Speed: 213–355 L/h — CAD to sand mold in a day
✔ Nitrogen-free furan or inorganic binder; onboard AC, sand recovery & mixer
✔ Lead time: configured to order — request a quote for delivery & installation

Build 98.4×59.1×39.4 in / 2500×1500×1000 mm

Prints CB sand, Cerabeads (pearl) sand, Ceramic sand, Silica (quartz) sand

Get quote

Made to order

· Lead time: configured to order — request a quote for delivery and installation.

QATM

Clamping fixtures

QATM clamping fixtures hold a workpiece securely and repeatably in a hardness tester so the indentation lands exactly where the specification requires — custom-designed to your part geometry and matched to your QATM or QNESS tester.

✓ Secure, repeatable positioning — no movement under test load
✓ Custom-designed for round, tubular, irregular and small parts
✓ Matched to QATM / QNESS bench testers and automated plants
✓ Lead time: 3–6 weeks — made to order

Get quote

Made to order

· Lead time: 3–6 weeks — made to order

Equipment

Have a CAD? Have a quote in 24h.