Tailored Warranty And Support

Financing Available Today

Powder

Check out our powder-metal 3D printers — the go-to machines when you need to print dense, high-performance metal parts straight from powder. These systems unlock the ability to turn bold, complex designs into functional components with superb strength and fidelity. Choose powder-metal printing and let your most ambitious ideas take shape in true metal, not just dreams.

17 products

Showing 9–16 of 17 Powder

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Lab Compact DED Metal 3D Printer – DMT Alloy Development | 150×150×150 mm

The InssTek MX-Lab is a compact, benchtop-scale DED metal 3D printer for materials research — a 5.9×5.9×5.9 in / 150×150×150 mm envelope, a six-hopper powder feeder blending up to six ratios at once, and the same DMT closed-loop melt-pool control as InssTek’s production systems.

✔ Six-hopper Hexa feeder, 0.03–2.0 g/min — high-entropy alloys & functionally graded materials
✔ DMT closed-loop control — dense, repeatable coupons for trustworthy data
✔ Argon >99.999% at ≤50 ppm O₂ — reactive-alloy research
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 5.9×5.9×5.9 in / 150×150×150 mm

Prints Cobalt alloys, Copper alloys, High-entropy & graded alloys, Nickel superalloys, Stainless & tool steels, Titanium

Get quote

Made to order

· Quote on request

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Med Medical DED Metal 3D Printer – Porous Titanium Implant Coating | 300×300×230 mm

The InssTek MX-Med is a DED metal 3D printer dedicated to medical work — a low-power 100 W laser and 200 µm beam that apply uniform porous titanium coatings to orthopedic implants for osseointegration, driven by DMT closed-loop melt-pool control across an 11.8×11.8×9.1 in / 300×300×230 mm envelope.

✔ Fine 100 W / 200 µm beam — delicate porous coatings without over-melting the substrate
✔ DMT closed-loop control — uniform, repeatable titanium layers
✔ Multi-axis motion follows curved implant geometry; argon ≤50 ppm O₂
✔ Lead time: configured to order — request a quote for delivery & installation

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 11.8×11.8×9.1 in / 300×300×230 mm

Prints Titanium (CP Ti, Ti-6Al-4V)

Get quote

Made to order

· Quote on request

Farsoon Technologies · Metal LPBF

Farsoon FS200M-2 LPBF Metal 3D Printer – Dual-Laser Series Production | 16.7×9.1×11.8 in / 425×230×300 mm

The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.

✓ 2×500 W — dual fiber lasers
✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×230×300 mm (16.7×9.1×11.8 in)

Prints 316L, 420, AlSi10Mg, ST1, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS273M LPBF Metal 3D Printer – Wide Alloy Range | 10.8×10.8×14.0 in / 275×275×355 mm

The Farsoon FS273M is a metal LPBF 3D printer with a 10.8×10.8×14.0 in / 275×275×355 mm build envelope, running one or two 500 W lasers (FS273M / FS273M-2).

✓ 10.8×10.8×14.0 in — build envelope
✓ 10.8×10.8×14.0 in / 275×275×355 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 275×275×355 mm (10.8×10.8×14.0 in)

Prints 316L, 420, AlMgScZr, AlSi10Mg, AlSi7Mg, CuCrZr, H13, HX, IN718, Pure Copper, Ta, TA15, Ti-6Al-4V, W, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm

The Farsoon FS301M is a metal LPBF 3D printer with a 12.0×12.0×16.1 in / 305×305×410 mm build envelope, running one or two 500 W lasers, each covering the full build area.

✓ 12.0×12.0×16.1 in — build cylinder
✓ 12.0×12.0×16.1 in / 305×305×410 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 305×305×410 mm (12.0×12.0×16.1 in)

Prints 17-4PH, 316L, 420, AlSi10Mg, HAYNES 230, HX, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS350M LPBF Metal 3D Printer – 4×500 W, 4×1000 W or 6×500 W Lasers | 17.1×14.1×15.7 in / 433×358×400 mm

The Farsoon FS350M is a multi-laser LPBF metal 3D printer for medium- to high-volume series production, supplied in 4×500 W, 4×1000 W or 6×500 W laser configurations on the same 17.1×14.1×15.7 in / 433×358×400 mm build cylinder.

✓ Three laser configurations — we supply and support all three
✓ 17.1×14.1×15.7 in / 433×358×400 mm build on a 65 sq ft / 6 m² class footprint
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 433×358×400 mm (17.1×14.1×15.7 in) (Height incl. build plate)

Prints 17-4PH, 316L, AlSi10Mg, ST1, Ti-6Al-4V, 18Ni300

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS422M CAMS LPBF Metal 3D Printer – Continuous Production | 16.7×16.7×16.5 in / 425×425×420 mm

The Farsoon FS422M CAMS is a metal LPBF 3D printer with a 16.7×16.7×16.5 in / 425×425×420 mm build envelope, running a single 500 W laser or quad 500 W lasers.

✓ 150 cm³/h — volume build rate
✓ 16.7×16.7×16.5 in / 425×425×420 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 425×425×420 mm (16.7×16.7×16.5 in)

Prints 316L, AlMgScZr, AlSi10Mg, CuSn10, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Farsoon Technologies · Metal LPBF

Farsoon FS621M LPBF Metal 3D Printer – Four Configurations up to 1.7 m Tall | 24.4×24.4×43.3 in / 620×620×1100 mm

The Farsoon FS621M is a metal LPBF 3D printer with a 24.4×24.4×43.3 in / 620×620×1100 mm build envelope, running four or six lasers at 500 W or 1000 W depending on configuration.

✓ 4 — configurations supplied
✓ 24.4×24.4×43.3 in / 620×620×1100 mm build envelope
✓ Open platform — full access to process parameters, qualify your own alloy
✓ Lead time: built to order — confirmed at quote

Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.

Build 620×620×1100 mm (24.4×24.4×43.3 in)

Prints 316L, AlSi10Mg, HAYNES 230, HX, IN625, IN718, TA15, Ti-6Al-4V

Get quote

Made to order

· Built to order

Have a CAD? Have a quote in 24h.

Upload your file or talk to an engineer — no obligation, no spam, NDA standard. First-time customers get free DfAM review.