Elemental Analyzers

Elemental analyzers for measuring carbon, sulfur, oxygen, nitrogen, and hydrogen in metals, powders, and ceramics. Accurate elemental data supports powder qualification, incoming inspection, and process control across additive manufacturing and metallurgy. Choose the analyzer configuration that fits your elements of interest and sample volume.

18 products

Showing 9–16 of 18 Elemental Analyzers

ELTRA ELEMENTRAC CS-r Carbon/Sulfur Analyzer – Resistance Furnace + IR | 20 ppm–100%

Resistance-furnace analyzer for fast, simultaneous carbon and sulfur in organic matrices — combustion up to 1,550 °C with up to four solid-gold infrared cells over 20 ppm to 100 %, and an optimized low-blank sample port for reliable low-carbon analysis.

✔ Simultaneous C/S · 20 ppm–100 % · high sample weights
✔ Resistance furnace to 1,550 °C (1 °C steps) · up to 4 solid-gold IR cells
✔ Low-blank sample port · dual-furnace option · TIC module (DIN EN 15936)
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

ELTRA ELEMENTRAC OH-p 2 Oxygen/Hydrogen Analyzer – Inert Gas Fusion | Steel, Metals & Ceramics

Inert-gas-fusion analyzer for oxygen and total hydrogen in metals — the sample melts in a graphite crucible in an 8.5 kW impulse furnace above 3,000 °C, with IR detection of oxygen and thermal conductivity for hydrogen.

✔ O / H by fusion · single or combined OH · inorganic samples
✔ 8.5 kW impulse furnace > 3,000 °C · closed gas system · low detection limits
✔ Up to 2000 mg · nitrogen carrier · Schuetze reagent · Autocleaner option
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

ELTRA ELEMENTRAC ON-p 2 Oxygen/Nitrogen Analyzer – Inert Gas Fusion | Steel, Metals & Titanium

Inert-gas-fusion analyzer for oxygen and nitrogen in metals — the sample melts in a graphite crucible in an 8.5 kW impulse furnace above 3,000 °C, with IR detection of oxygen and thermal conductivity for nitrogen.

✔ O / N by fusion · single or combined ON · inorganic samples
✔ 8.5 kW impulse furnace > 3,000 °C · closed gas system · low detection limits
✔ Up to 2000 mg · argon carrier possible · Autocleaner option
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

ELTRA ELEMENTRAC ONH-p 2 Oxygen/Nitrogen/Hydrogen Analyzer – Inert Gas Fusion | Steel, Metals & Titanium

Inert-gas-fusion analyzer for oxygen, nitrogen and hydrogen in metals — the sample melts in a graphite crucible in an 8.5 kW impulse furnace above 3,000 °C, with IR detection of oxygen and thermal conductivity for nitrogen and hydrogen.

✔ O / N / H by fusion · single or ON / OH / NH / ONH · inorganic samples
✔ 8.5 kW impulse furnace > 3,000 °C · closed gas system · low detection limits
✔ Up to 2000 mg · 32-position autoloader · Autocleaner · argon possible
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

ELTRA H-500 Hydrogen Analyzer – Hot Extraction + TCD | Steel, Copper & Alloys

Analyzer for hydrogen in metals by hot extraction — the solid sample drops into a tilting furnace at 900–1,000 °C, and a nitrogen carrier sweeps the diffused hydrogen into a high-capacity thermal conductivity cell in 3–15 minutes.

✔ Residual / diffusible hydrogen · hot extraction · precise at low levels
✔ Tilting furnace 900–1,000 °C · high-capacity thermal conductivity cell
✔ Solid samples up to ø13×60 mm / 10 g · minimal prep
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

ELTRA SurfaceC-800 Surface Carbon Analyzer – Combustion + IR | Steel, Aluminum & Ceramics

Dedicated surface-carbon analyzer for solid samples — combustion in a resistance furnace up to 1,000 °C with infrared CO₂ detection, from trace level to 1,000 µg/cm² in 60–90 seconds.

✔ Surface carbon: trace–1,000 µg/cm² · 60–90 s per analysis
✔ Resistance furnace to 1,000 °C · solid-state IR cells (1–2)
✔ Large samples up to 32×145 mm · minimal prep · gold IR path option
✔ Lead time: configured to order — request current timeline

Get quote

Made to order

· Lead time: configured to order — request current timeline

ELTRA TGA Thermostep ML Thermogravimetric Analyzer – Manual-Lid Moisture, Ash & Volatiles | 19 Samples

Manual-lid thermogravimetric analyzer — programmable furnace plus integrated balance measures moisture, ash and volatiles in up to 19 samples per run, 50–1,000 °C. A more economical route to standard-compliant TGA.

✔ 19 samples + 1 reference · 500 mg–5 g · moisture/ash/volatiles in one run
✔ Ceramic furnace 50–1,000 °C · N₂/O₂/air per stage · manual crucible lids
✔ Encapsulated balance 0.1 mg · ASTM D 7582 compliant
✔ Lead time: configured to order — request current timeline

Get quote

Made to order

· Lead time: configured to order — request current timeline

ELTRA TGA Thermostep Thermogravimetric Analyzer – Moisture, Ash & Volatiles | 19 Samples, 1000 °C

Automated thermogravimetric analyzer that combines a programmable furnace with an integrated balance — measures moisture, ash and volatiles in up to 19 samples per run, 50–1,000 °C.

✔ 19 samples + 1 reference · 500 mg–5 g · moisture/ash/volatiles in one run
✔ Ceramic furnace 50–1,000 °C · N₂/O₂/air per stage · crucible-lid handling
✔ Encapsulated balance 0.1 mg · ASTM D 7582 compliant
✔ Lead time: configured to order — request current timeline

Get quote

Made to order

· Lead time: configured to order — request current timeline

Elemental Analyzers

Have a CAD? Have a quote in 24h.