Composite Tooling Materials for 3D Printing

Showing 25–32 of 44 Composite Tooling

Sygnis · DIW

Sygnis Ceramic Paste for Direct Ink Writing (DIW) – Al₂O₃, ZrO₂, SiC & YSZ | Heat-Resistant Insulating Parts

Direct Ink Writing–ready ceramic pastes for robust, thermally stable, electrically insulating parts — from alumina to zirconia and silicon carbide.

Alumina (Al₂O₃), YSZ, zirconia (ZrO₂), silicon carbide (SiC), aluminosilicate and titania (TiO₂)
Formulated for DIW / paste extrusion — heat-resistant, high-strength, insulating components
Proven across automotive, medical, chemical and food-industry applications

Priced and supplied per configuration — composition, pack size and lead time confirmed at quote. NDA standard.

Request a quote →

Get quote

On backorder

· Supplied per configuration — pack size and lead time confirmed at quote.

Sygnis · DIW

Sygnis Silicone for Direct Ink Writing (DIW) — Printable Silicone Ink | 20–80 Shore A

Printable liquid silicone for Direct Ink Writing (DIW) — low viscosity for clean extrusion and low-temperature curing, in a tunable 20–80 Shore A hardness range for flexible, durable printed parts.

✓ 20–80 Shore A · service range −50 °C to 200 °C
✓ Low viscosity, low-temperature cure · bonds to metal, glass, ceramic, plastic
✓ For DIW / paste-extrusion printing · priced per configuration

Get quote

In stock

· Priced and shipped per configuration — hardness grade, pack size and lead time confirmed at quote.

3DCeram · CERAMIC SLA

Tricalcium Phosphate 3D Printing Paste

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 3Y 3D Printing Paste

Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.

✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Zirconia 8Y 3D Printing Paste

Print oxygen-ion-conducting 8Y zirconia parts on 3DCeram's Ceramaker laser-SLA platform for solid-oxide fuel cells and electrochemical hardware.

✓ σ·T = 17 S·cm⁻¹·K at 800 °C — fully-stabilized SOFC electrolyte material, >99% dense
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Alumina 1,75mm

Print dense alumina (Al₂O₃) ceramic parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to a technical-ceramic component.

✔ 295 MPa average flexural strength, 213 GPa elastic modulus and 3.9 g/cc after solid-state sintering at 1650°C
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm ceramic feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Metal 17-4PH 1,75mm

Print 17-4PH stainless-steel parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, precipitation-hardenable metal.

✔ Rp0.2 680 MPa / Rm 880 MPa / 257 HV10 — tested to DIN EN ISO 6892 & 6507-1 at ESA's ESTEC facility
✔ Debind & sinter parameters plus full datasheet included with every spool
✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Metal 316L 1,75mm

Print 316L stainless-steel parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to dense, corrosion-resistant metal.

✔ Rp0.2 149 MPa, Rm 485 MPa and 158 GPa modulus after sintering — tested to ASTM E8/E8M
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm bound-metal feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

Composite Tooling

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)