Automotive

Showing 25–32 of 126

$Microtrac S3500 Laser Diffraction Particle Size Analyzer – Tri-Red-Laser | 0.02–2800 µm$

Microtrac

Microtrac S3500 Laser Diffraction Particle Size Analyzer – Tri-Red-Laser | 0.02–2800 µm

Tri-red-laser diffraction particle size analyzer — 0.02 to 2,800 µm, wet and dry on one bench, with fixed enclosed optics and Modified Mie sizing for non-spherical powders.

✔ Range 0.02–2,800 µm · three red 780 nm lasers, 151 detector segments
✔ Wet and dry measurement · ~10–30 s per run
✔ Fixed enclosed optics — holds calibration, minimal operator intervention
✔ Lead time: configured to order — request current timeline

Get quote

In stock

· Lead time: configured to order — request current timeline

$Microtrac SYNC Particle Size & Shape Analyzer – Laser Diffraction + Image Analysis | 0.01–4000 µm$

Microtrac

Microtrac SYNC Particle Size & Shape Analyzer – Laser Diffraction + Image Analysis | 0.01–4000 µm

The Microtrac SYNC measures particle size and shape in a single measurement — laser diffraction and dynamic image analysis in one cell, 0.01 to 4,000 µm, wet or dry.

✔ Size + shape together: LD (ISO 13320) + DIA (ISO 13322-2)
✔ Range 0.01–4,000 µm · patented BLEND routine
✔ 5.2 MP camera at 60 fps · 30+ morphology parameters
✔ Lead time: configured to order — request current timeline

Get quote

On backorder

· Lead time: configured to order — request current timeline

AM Solutions, Rösler · Cleaning

AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts

Automated cleaning system for large SLA 3D-printed parts and build platforms — a compound immersion process that cleans and loosens supports without IPA or critical solvents.

✓ IPA-free cleaning of large SLA parts up to 750 × 750 × 550 mm
✓ Auto-cleans the build platform · loosens supports for easy removal
✓ Lead time: 6–10 weeks — built & configured to order

From $95700

Add to cart

On backorder

· Lead time: 6–10 weeks — built & configured to order. Install and operator training included.

AM Solutions, Rösler · Support removal

AM Solutions C1 — Automated Support & Resin Removal System (Benchtop)

Benchtop automated system that removes support structures and cleans uncured resin from delicate photopolymer 3D-printed parts — a compound dip process with no IPA or critical solvents.

✓ Automated support removal + cleaning for SLA / DLP / PolyJet parts
✓ IPA-free compound · 230 V plug-and-play benchtop
✓ Lead time: 5–8 weeks — built to order · install + training included

From $31970

Add to cart

On backorder

· Lead time: 5–8 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Surface finishing

AM Solutions M1 Basic — Entry-Level Vibratory Finishing System

Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.

✓ Automated deburr, smooth and clean for metal and plastic parts
✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
✓ Lead time: 5–8 weeks — built to order · install + training included
✓ Starter consumable included — 25 L of finishing media, ready to run out of the box

From $32460

Add to cart

On backorder

· Lead time: 5–8 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Surface finishing

AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts

Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.

✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California

From $20560

Add to cart

On backorder

· 4-6 weeks

AM Solutions, Rösler · Surface finishing

AM Solutions M4 — Mobile 2-in-1 Vibratory Finishing System

Mobile 2-in-1 vibratory mass-finishing system that deburrs, smooths and cleans metal and plastic 3D-printed parts with an integrated cleaning centrifuge and water recycling — no plumbing needed.

✓ Deburr, smooth, matte and clean in one 120 L machine
✓ Integrated water treatment — plug-and-play, <69 dB(A)
✓ Lead time: 6–9 weeks — built to order · install + training included
✓ Starter consumable included — 75 L of finishing media, ready to run out of the box

From $55920

Add to cart

On backorder

· Lead time: 6–9 weeks — built to order. Install and operator training included.

AM Solutions, Rösler · Cleaning, Surface finishing

AM Solutions S1 Wet — Automated Wet-Blasting Cleaning & Finishing System

Automated wet-blasting cell that cleans and surface-finishes metal and polymer 3D-printed parts with a water-media slurry — dust-free, spark-free, no ATEX compliance needed.

✓ Wet blasting for metal LPBF parts + polymers — no dust, no ATEX
✓ PLC recipes, closed-loop water + media recycling
✓ Lead time: 8–12 weeks — built & configured to order

From $167280

Add to cart

On backorder

· Lead time: 8–12 weeks — built & configured to order. Install and operator training included.

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)