Automotive

Showing 89–96 of 126

Formlabs · SLS

Formlabs Fuse 1 Build Chamber – Removable SLS Powder Chamber | BC-FS1-120V-01

Genuine removable build chamber for the Formlabs Fuse 1 SLS 3D printer — the modular powder chamber that holds the 165 × 165 × 300 mm build and transfers to the Fuse Sift for cooling and part recovery.

✓ Full 6.5 × 6.5 × 11.8 in / 165 × 165 × 300 mm build volume
✓ Swap chambers to keep printing while another cools and is unpacked
✓ Genuine Formlabs part BC-FS1-120V-01 — supported by Additive Plus

Build 165 × 165 × 300 mm, 6.5 × 6.5 × 11.8 in

From $3999

Add to cart

On backorder

· Currently on backorder — contact us for the latest lead time

Kings3D · FFF

Kings 3040 Industrial FFF 3D Printer – Klipper High-Speed | 11.81×11.81×15.75 in / 300×300×400 mm

Industrial FFF. Klipper high-speed. Closed-loop servos. Built for functional prototypes, jigs, fixtures and small production runs in standard engineering filaments — with the repeatability hobby machines can't hold.

✓ 11.81×11.81×15.75 in / 300×300×400 mm build volume — industrial linear guides on XY
✓ Klipper high-speed to 350 mm/s · 70 W Volcano hot end · heated bed to 120 °C
✓ Open 1.75 mm ecosystem — PLA, ABS, PETG, TPU from any supplier · BMG dual-drive
✓ Ships configured & tested — onboarding and demo units available

Build 300 x 300 x 400 mm, 11.81 x 11.81 x 15.75 in

Get quote

On backorder

· 2–3 months from order placement. Need it sooner? Talk to a specialist.

Kings3D · FFF

Kings 5060 Large-Format Industrial FFF 3D Printer – 320°C | 19.69×19.69×23.62 in / 500×500×600 mm

Large-format industrial FFF. 320 °C hot end. Klipper high-speed. Built for big functional parts and high-temperature engineering materials — nylon, carbon-fibre composites, ASA and polycarbonate.

✓ 19.69×19.69×23.62 in / 500×500×600 mm build volume — big parts in one build
✓ 320 °C hot end · Klipper high-speed to 350 mm/s · industrial linear guides + closed-loop servos
✓ Open 1.75 mm ecosystem — PLA, TPU, ABS, PETG, ASA, carbon-fibre, nylon
✓ Ships configured & tested — onboarding and demo units available

Build 19.69 x 19.69 x 23.62 in, 500 x 500 x 600 mm

Get quote

On backorder

· 2–3 months from order placement. Need it sooner? Talk to a specialist.

Kings3D · FFF

Kings FDM 1000 Large-Format FFF 3D Printer – 1 m³ Enclosed Build | 1000×1000×1000 mm

Industrial large-format FFF 3D printer — 39×39×39 in / 1000×1000×1000 mm fully enclosed build, BMG dual-gear direct-drive extruder up to ~320°C, 110°C heated bed. Runs PLA, ABS, PETG, TPU, PA nylon, and PA12-CF carbon-fiber from 1.75 mm filament. Priced by configuration.

✓ 39×39×39 in / 1 m³ fully enclosed build — one-piece large prototypes and tooling
✓ BMG direct-drive to ~320°C + 110°C heated bed — engineering and carbon-fiber filaments
✓ Lead time: 2–3 months — configured to order, installed and trained on-site

Build 39x39x39 in / 1000x1000x1000 mm

Get quote

On backorder

· 2–3 months from order placement. Need it sooner? Talk to a specialist.

Kings3D · FGF

Kings FGF800 Pellet Extrusion 3D Printer – Large Format | 800×600×800 mm

Large-format pellet extrusion 3D printer — 31×24×31 in / 800×600×800 mm, raw polymer granules, 0.4–2 mm nozzle selection. Optional 450°C nozzle for PEEK/PEKK/ULTEM. Material cost 5–10× lower than equivalent filament.

✓ Pellet feedstock — 5–10× lower material cost vs. filament at the same polymer
✓ Optional 450°C nozzle — PEEK, PEKK, ULTEM at 800×600×800 mm scale
✓ Lead time: 2–3 months — configured to order, installed and trained on-site

Build 31x24x31 in / 800x600x800 mm

From $34200

Add to cart

On backorder

· 2–3 months from order placement. Need it sooner? Talk to a specialist.

Polymaker

Polymaker PolyBox Edition II 3D Printer Filament Dry Box – Humidity Below 15% | 1.75 & 2.85 mm

The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.

✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
✓ Feeds filament straight into the printer while sealed

From $69

Add to cart

On backorder

· Currently on backorder — contact us for lead time

UltiMaker · FFF

UltiMaker PVA Removal Station – Dissolve PVA Supports up to 4× Faster

Automated support-removal station that dissolves PVA up to 4× faster than motionless water — magnetic rotor circulation, an illuminated tank, and a lift-out rinsing basket for hands-off post-processing.

✓ Up to 4× faster PVA removal — cuts operator time up to 80%
✓ 200 × 230 × 165 mm basket · 13.7 L illuminated tank with saturation indicator
✓ Genuine UltiMaker hardware — made to order, typical lead time 1–2 weeks

From $1095

Add to cart

On backorder

· Made to order — typical lead time 1–2 weeks (confirmed at checkout)

UltiMaker · FFF

UltiMaker S3/S5 Printhead Assembly – Genuine Print Head | P/N 225661

Genuine UltiMaker replacement print head for the S3 and S5 — a complete assembly with printhead cable, PCB, cooling fans, nozzle seal and clamp clips to restore print quality and cut downtime.

✓ OEM UltiMaker P/N 225661 (supersedes 219259) — fits S3, S5 & S5 Pro Bundle
✓ Complete unit: cable, PCB, fans, nozzle seal, clamp clips
✓ Genuine part — made to order, typical lead time 1–2 weeks

From $497

Add to cart

On backorder

· Made to order — typical lead time 1–2 weeks (confirmed at checkout)

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)