What is 17-4PH stainless steel powder?

17-4PH is a martensitic, precipitation-hardening stainless steel powder used for LPBF metal 3D printing, offering high strength, hardness, and corrosion resistance ideal for industrial parts in Los Angeles manufacturing.

What additive manufacturing process is compatible with 17-4PH?

This powder is optimized for Metal LPBF (Laser Powder Bed Fusion) to produce dense, high-performance parts for Los Angeles-based applications.

Can 17-4PH be heat treated?

Yes — 17-4PH is precipitation-hardenable. After LPBF printing, age hardening and solution annealing allow tuning of strength and toughness.

What are common 17-4PH applications in Los Angeles industries?

Typical uses include aerospace brackets, tooling, functional prototypes, valves, engine parts, and industrial fixtures.

What industries use 17-4PH stainless steel powder?

It’s widely used in aerospace, petrochemical, automotive, medical tools, and general manufacturing sectors, including Los Angeles manufacturers and service shops.

How does 17-4PH compare to 316L stainless steel?

17-4PH generally has higher strength and hardness but somewhat lower corrosion resistance than 316L, making it better for load-bearing parts printed in LPBF.

Is 17-4PH suitable for tooling and molds?

Yes. Its high strength and hardness make it suitable for industrial tooling, conformal cooling channels, and molds produced by LPBF.

What mechanical properties can I expect after heat treatment?

17-4PH parts can achieve tensile strengths up to around 1,100–1,300 MPa and hardness levels up to ~44 HRC after proper aging.

Yes — as a martensitic stainless steel, parts printed from 17-4PH exhibit magnetic properties.

Does 17-4PH have good corrosion resistance?

It provides good corrosion resistance in many environments and similar resistance to some 300 series stainless steels, suitable for functional parts.

Can this powder be used for functional end-use parts?

Yes. LPBF 17-4PH is suitable for durable, load-bearing components used in industrial and aerospace parts in Los Angeles.

Is 17-4PH suitable for rapid prototyping?

Absolutely. Its alloy balance allows quick design iteration with the mechanical properties needed for functional prototypes.

Does the powder have good flowability for LPBF systems?

Yes. Premium powders are gas atomized and spherical to support consistent powder spreading and reliable LPBF printing.

What particle size distributions are common for 17-4PH?

Typical LPBF powder sizes range around 15–45 µm, ideal for achieving good surface finish and part density.

Can 17-4PH be machined after printing?

Yes, printed and heat-treated parts can be machined for finishing or tight-tolerance features.

Is welding possible on 17-4PH parts?

Yes, standard welding methods can be used, though post-weld heat treatment may be required to optimize mechanical properties.

Does Los Angeles manufacturing use 17-4PH for aerospace parts?

Yes, aerospace LPBF applications in Los Angeles frequently choose 17-4PH for its strength, durability, and thermal performance.

How does LPBF printing impact mechanical anisotropy?

LPBF can introduce direction-dependent mechanical properties, so orientation and heat treatment planning are key for high-performance parts.

What post-processing is recommended after printing?

Stress relief, solution annealing, and aging help unlock maximum strength, reduce residual stresses, and improve toughness.

Can 17-4PH produce high-strength load-bearing parts?

Yes. Parts can achieve high yield and tensile strength after LPBF and proper age hardening.

Is 17-4PH suitable for chemical processing equipment?

Yes, its corrosion resistance and strength make it suitable for valves, manifolds, and pump components in industrial environments.

Is 17-4PH suitable for chemical processing equipment?

Yes, its corrosion resistance and strength make it suitable for valves, manifolds, and pump components in industrial environments.

Can the powder be used for small-batch production?

Yes. LPBF printing with 17-4PH supports low- to medium-volume runs with minimal tooling.

Is this powder a good choice for parts used at elevated temperatures?

Yes, 17-4PH retains good mechanical performance at moderately elevated service temperatures after aging.

Does Additive Plus offer LPBF printing services in Los Angeles with 17-4PH?

Yes — Additive Plus provides LPBF metal 3D printing and materials support for projects in the Los Angeles area.

Are printed 17-4PH parts suitable for medical-tool applications?

Yes, when properly processed, they can serve in surgical instruments and medical tooling where strength and corrosion resistance are needed.

What is 17-4PH stainless steel powder used for in Los Angeles metal 3D printing?

17-4PH stainless steel powder is widely used in Los Angeles for metal 3D printing of high-strength, corrosion-resistant components using LPBF technology, especially for aerospace, defense, and industrial applications.

Is this 17-4PH powder suitable for LPBF systems in Los Angeles facilities?

Yes, this 17-4PH stainless steel powder is optimized for metal LPBF systems commonly used in Los Angeles manufacturing and R&D facilities.

Where can 17-4PH stainless steel powder be sourced in Los Angeles?

This 17-4PH stainless steel powder is available through Additive Plus in Los Angeles, supporting local industrial and additive manufacturing needs.

Is Avimetal 17-4PH powder production-ready for Los Angeles manufacturers?

Yes, Avimetal 17-4PH powder is production-ready and designed for consistent LPBF performance in Los Angeles-based production environments.

What particle size distribution does this 17-4PH powder have for Los Angeles LPBF users?

The powder features a controlled particle size distribution of 15–53 µm, ideal for stable LPBF printing in Los Angeles metal 3D printing facilities.

Is this 17-4PH stainless steel powder gas-atomized for Los Angeles LPBF printing?

Yes, the powder is manufactured using gas atomization, producing spherical particles optimized for LPBF systems used in Los Angeles.

Can 17-4PH parts printed in Los Angeles be heat treated?

Yes, 17-4PH stainless steel parts printed in Los Angeles can be heat treated to achieve high strength, hardness, and predictable mechanical performance.

What mechanical properties can Los Angeles users expect after heat treatment?

After heat treatment, Los Angeles manufacturers can achieve tensile strength up to 1300 MPa, yield strength of 1100 MPa, and hardness around 43 HRC.

Is this powder suitable for aerospace applications in Los Angeles?

Yes, 17-4PH stainless steel powder is widely used in Los Angeles aerospace applications for brackets, housings, and structural components.

Do Los Angeles defense contractors use 17-4PH stainless steel powder?

Yes, defense contractors in Los Angeles commonly use 17-4PH stainless steel powder for high-strength and corrosion-resistant metal components.

Is this 17-4PH powder suitable for industrial tooling in Los Angeles?

Yes, Los Angeles manufacturers use this 17-4PH powder for producing tooling, jigs, fixtures, and industrial machine components.

Can Los Angeles automotive manufacturers use 17-4PH LPBF powder?

Yes, automotive and transportation companies in Los Angeles use 17-4PH stainless steel powder for high-stress functional parts.

Is this powder suitable for energy and power applications in Los Angeles?

Yes, 17-4PH stainless steel powder is used in Los Angeles energy and power generation projects requiring durable, corrosion-resistant components.

What post-processing options are available for Los Angeles users?

Los Angeles users can apply heat treatment, CNC machining, welding, polishing, and surface finishing to 17-4PH LPBF parts.

Is the powder compatible with standard LPBF machines in Los Angeles?

Yes, the powder is compatible with most standard metal LPBF and DMLS machines commonly used in Los Angeles.

Does this 17-4PH powder offer stable recoating for Los Angeles LPBF printing?

Yes, the spherical morphology ensures smooth recoating and stable layer deposition for LPBF printing in Los Angeles facilities.

Is oxygen content controlled for reliable LPBF printing in Los Angeles?

Yes, controlled oxygen content ensures consistent flowability and predictable LPBF results for Los Angeles manufacturers.

Can Los Angeles customers order this powder in bulk quantities?

Yes, Los Angeles customers can order 17-4PH stainless steel powder in bulk quantities with volume-based pricing.

What packaging size is available for Los Angeles buyers?

The powder is available in 10 kg bottles, suitable for LPBF production workflows in Los Angeles.

What is the typical delivery time for Los Angeles orders?

Delivery for Los Angeles orders is typically up to two weeks, depending on availability.

Is this powder suitable for end-use parts manufactured in Los Angeles?

Yes, this production-grade 17-4PH powder is ideal for manufacturing end-use metal parts in Los Angeles.

Can Los Angeles R&D teams use this powder for prototyping?

Yes, research and development teams in Los Angeles use 17-4PH stainless steel powder for prototyping and validation.

Is this powder magnetic after printing for Los Angeles applications?

Yes, 17-4PH stainless steel is magnetic after printing and heat treatment, which is relevant for certain Los Angeles industrial applications.

How does 17-4PH compare to 316L for Los Angeles metal 3D printing?

Compared to 316L, 17-4PH offers higher strength and heat-treatable properties, making it preferred for structural parts in Los Angeles.

Is welding supported for 17-4PH parts printed in Los Angeles?

Yes, 17-4PH stainless steel parts printed in Los Angeles can be welded using standard post-processing techniques.

In stock

17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

In every order

Full lot COA — PSD, sphericity, flow rate, chemistry
Mutual NDA before any file or spec review

Materials, Composite Tooling, Engineering, Iron Base, Jigs&Fixtures, LPBF (DMLS) 3D Printing Materials, Manufacturing, Metal Powders 3D Printing Materials · Metal LPBF

17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

High strength. Heat-treatable. Production-ready. Genuine AVIMETAL 17-4PH precipitation-hardening stainless steel for LPBF metal 3D printing.

✓ Gas-atomized, low-oxygen — full COA on every lot
✓ Strong value alternative, sold in small workable volumes
✓ Fast dispatch from Los Angeles

PSD (particle size distribution)

15–53 micrometres $450

Price held 7 days after order.

NDA standard Ships in 1–2 business days

60+AM teams supplied

Lot-to-lotstable PSD & chemistry

COA + parametersin every order

Fast dispatchL.A. stock · M–F

Built for production teams

What your process engineer actually checks

Locked, traceable lot chemistry

Every lot ships with a COA documenting PSD, sphericity, flow rate, apparent density, and full chemistry — and a lot number you can trace. Aerospace and medical teams reorder 4+ times without re-qualifying.

A materials engineer on the line

Questions on ferrite content, flowability, recyclate ratios, or HIP response? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.

About this product

AVIMETAL 17-4PH is a martensitic, precipitation-hardening stainless steel powder for laser powder bed fusion (LPBF). It pairs high strength and hardness with good corrosion resistance and reliable performance up to 600°F (316°C), and age-hardens in a single, low-temperature step so you can dial in the strength-to-toughness balance your part needs.

Produced by AVIMETAL — a leading specialist manufacturer of additive-manufacturing metal powders with in-house liquid-metal atomization and a strong track record across aerospace, medical and automotive applications.

Why teams buy this powder from Additive Plus

Genuine AVIMETAL 17-4PH — gas-atomized for high sphericity, low oxygen and consistent flow.
A strong value alternative to premium Western powders, at an accessible, published price.
Available in small, workable volumes — most mills sell large minimums and hide pricing behind an account; we stock it and sell it in accessible quantities.
Full COA with every lot — particle size distribution, chemistry, apparent density and flow rate, with a traceable lot number.
Fast dispatch from Los Angeles. Need a custom alloy or tighter cut? We also run our own atomization in-house for custom small-batch powder.

Standards & equivalents

Made to the 17-4PH specification: ASTM A564 · UNS S17400 · AMS 5643 · AISI 630 · 1.4542
Machine type: F — LPBF · Particle size: 15–45 µm · Bottle: 10 kg / 22 lbs
Quality: gas-atomized on dedicated AVIMETAL lines for high sphericity and low oxygen; every lot ships with a full COA. (Additive Plus resells genuine AVIMETAL powder in small volumes.)

Chemical composition

Typical chemistry (wt%) for 17-4PH stainless steel:

Element	Content	Element	Content
Iron (Fe)	Balance	Manganese (Mn)	≤ 1.00%
Chromium (Cr)	15.00–17.50%	Silicon (Si)	≤ 1.00%
Nickel (Ni)	3.00–5.00%	Carbon (C)	≤ 0.07%
Copper (Cu)	3.00–5.00%	Phosphorus (P)	≤ 0.040%
Niobium + Tantalum	0.15–0.45%	Sulfur (S)	≤ 0.030%

Heat treatment & processing

Age-hardenable in a single, low-temperature step (e.g. H900) — choose the condition to tune strength vs. toughness.
Forgiving to print on commercial LPBF systems; stress relief recommended before part removal.
Readily machined and finished in the solution-treated and aged conditions.

Key performance benefits

Good strength, toughness, hardness and ductility
Excellent response to precipitation (age) hardening
Good corrosion resistance in industrial environments
Stable mechanical properties up to 600°F (316°C)
Well suited for functional parts and tooling

Typical applications

Functional and structural production parts
Valves, fittings and manifolds
Pumps and impellers
Rapid tooling and fixtures
Industrial and chemical-processing equipment

Material comparison: 17-4PH vs 15-5PH vs 316L

Feature	17-4PH	15-5PH	316L
Type	Martensitic PH	Martensitic PH	Austenitic
Strength & hardness	High	High	Moderate
Corrosion resistance	Good	Good	Excellent
Heat treatable	Yes (aging)	Yes (aging)	No
Magnetic	Yes	Yes	No
Typical use	Strong structural parts, tooling	High-strength parts	Corrosion-critical parts

Brand	Avimetal
Technology	Metal LPBF
Powder Package	10 kg bottle, 440 kg hopper, 840 kg hopper
PSD (particle size distribution)	15–53 micrometres
Printing Materials	Metal Powders
Material	17-4PH
Country of origin	China
Production Method	Gas Atomization (GA)

Frequently bought together

Complete the workflow

Engineering

EOS M290 SS316 Build Plate | 50mm Corrosion-Resistant LPBF Platform

316L stainless steel build plate for EOS M280/M290 LPBF systems. 9.92×9.92×1.97in (252×252×50mm) profile, CNC-machined and ground flat for consistent stainless and tool-steel builds.

✓ 316L — stronger pitting and chemical resistance than 304 stainless
✓ Precision-ground flatness for consistent first-layer adhesion
✓ Lead time: 6–8 weeks — configured to order

From $720

Get quote

6-8 weeks

Additive Manufacturing Solutions

Delfin Mistral 451 BL Inert Vacuum – Reactive Metal Powder for 3D Printing | Immersion Separation

Immersion-separation industrial vacuum for reactive metal powder — aluminium, titanium and similar alloys — in 3D printing and powder handling. Captures powder under liquid so it's never a dry, ignition-sensitive cloud. ATEX-rated, antistatic, single-phase.

✓ For reactive AM powder (Al, Ti, Mg) — the safe alternative to a dry vacuum
✓ Two-stage antistatic filtration + grounded construction · ATEX docs on request
✓ In US stock · ships in 2 business days · genuine Delfin unit

From $11391

Add to cart

2 Business Days

Depowdering stations

AM Solutions S1 — Automated Depowdering & Surface Finishing System

Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.

✓ Depowdering + surface finishing in one ATEX-compliant cell
✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
✓ Lead time: 6–9 weeks — built to order · install + training included

For Cleaning, Surface finishing

From $69920

Add to cart

Lead time: 6–9 weeks — built to order. Install and operator training included.

Composite Tooling

SS316L Steel Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

Corrosion-resistant. Biocompatible. Production-ready. Genuine AVIMETAL 316L austenitic stainless steel for LPBF metal 3D printing.

✓ Gas-atomized, low-oxygen — full COA on every lot
✓ Strong value alternative, sold in small workable volumes
✓ Fast dispatch from Los Angeles

For Metal LPBF

From $510

Get quote

5-10 Business Days

1 / 1

Not ready for a full bottle? Request a sample or a custom quantity.

From process engineers running 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

Unedited feedback from customers who reorder 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs.

★★★★★ 4.9 / 5 · 24 reviews

★★★★★

Same lot 4 times in a row. We stopped re-running parameter sweeps after the second order — density was identical to the first build.

Marcus K. Process Engineer · Aerospace OEM

★★★★★

Asked about ferrite content on a Friday. A materials engineer answered Monday morning with actual data, not a sales pitch. That's why we keep ordering.

Priya S. R&D Lead · Medical Devices

★★★★★

COA matches the bottle. PSD and flow are exactly what was on the sheet — we run it on a Renishaw 500Q and it hits density on the first try.

Diego R. Production Lead · Energy

Common questions

Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.

What quantity do you sell — can I order a small amount?

Yes. We stock this AVIMETAL alloy and sell it in accessible quantities — a 10 kg bottle as standard, with larger production volumes available. Most mills require large minimums and hide pricing behind an account; we keep it simple with a clear, published price and small-lot availability. Need a different volume? Just ask.

Do you provide a Certificate of Analysis (COA)?

Every lot ships with a full COA — particle size distribution, chemistry, apparent density and flow rate — plus a traceable lot number, so you can qualify once and reorder the same material with confidence.

Place your order, or talk to an engineer first

Order 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs direct, or talk to materials engineer

Add to cart

17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

What your process engineer actually checks

Locked, traceable lot chemistry

A materials engineer on the line

Why teams buy this powder from Additive Plus

Standards & equivalents

Chemical composition

Heat treatment & processing

Key performance benefits

Typical applications

Material comparison: 17-4PH vs 15-5PH vs 316L

We atomize our own. Custom variants on request.

Complete the workflow

Other products teams run alongside 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

From process engineers running 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs

Common questions

Place your order, or talk to an engineer first

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)