In stock
- COA on request — PSD, sphericity, flow rate, chemistry
- Mutual NDA before any file or spec review
IN939 Nickel Alloy Powder (939W) for LPBF — 15–45 µm, 10 kg
Carpenter IN939 Nickel Superalloy powder price: $1,745 per 10 kg ($174.50/kg)
Additive-manufacturing variant of cast IN939 for hot-gas-path turbine parts such as vanes, blades and shrouds: strength, wear and oxidation resistance at high temperature, and precipitation-hardenable. Vacuum-induction-melted and argon-atomized by Carpenter Additive (PowderRange 939W).
Values from the Carpenter PowderRange 939W datasheet.
Which high-temperature nickel alloy is right for your build?
All of them are in our catalog at a published price. Pick by machine, timing and country of origin.
| Powder | Particle size | Origin | Availability | Good fit for | 10 kg | |
|---|---|---|---|---|---|---|
 Carpenter Additive 939WThis page | 15–45 µm · LPBF | Confirmed per lot | In stock | Hot-gas-path turbine parts; precipitation-hardenable | $1,745 | Add to cart |
 Carpenter Additive X (Hastelloy X) FFine cut | 15–45 µm · LPBF | Confirmed per lot | In stock | Oxidation resistance to 1204 °C (2200 °F), LPBF | $1,105 | View |
 Carpenter Additive X (Hastelloy X) ECoarse cut | 45–106 µm · EBM | Confirmed per lot | In stock | Hastelloy X for electron-beam systems | $515 | View |
 Carpenter Additive GRX-810NASA ODS alloy | 15–45 µm · LPBF | Confirmed per lot | In stock | NASA ODS alloy: oxidation resistance to 1316 °C (2400 °F) | $4,955 | View |
Need a specific country of origin for a government or defense program? Ask before ordering and we will confirm it in writing for your lot.
What is in the container
Specification from the manufacturer. The certificate for your lot is available on request.
Specification
Type analysis, PowderRange 939W datasheet (Carpenter Additive). Single figures are maximum except where noted.
| Element | wt% |
|---|---|
| Nickel (Ni) | Balance |
| Chromium (Cr) | 22.0–23.0 |
| Cobalt (Co) | 18.0–20.0 |
| Titanium (Ti) | 3.00–4.50 |
| Aluminum (Al) | 1.00–3.00 |
| Tungsten (W) | 1.00–3.00 |
| Tantalum (Ta) | 1.00–1.80 |
| Niobium (Nb) | 0.50–1.50 |
| Manganese (Mn) | 0.50 |
| Silicon (Si) | 0.50 |
| Carbon (C) | 0.15 |
| Zirconium (Zr) | 0.10 |
| Boron (B) | 0.01 |
| Powder property | Requirement |
|---|---|
| Above 53 µm | max 1 wt% (ASTM B214) |
| Below 15 µm | max 10 vol% (ASTM B822) |
| D10 / D50 / D90 | measured and reported on the lot certificate |
| Hall flow, apparent density | measured and reported (ASTM B213, B212) |
| Melting and atomization | Vacuum induction melted, argon gas atomized |
What comes with your lot
From the manufacturer certificate
- Chemistry against the specification limits on the left
- Particle size distribution: D10, D50, D90
- Flow rate and apparent density
- Lot number for traceability
The certificate for your lot is available on request. The manufacturer datasheet for this alloy has no particle image; ask us if you need one.
How the printed metal performs
Carpenter does not publish printed-property data on the datasheet for this alloy. Ask our materials engineer for available data, or qualify the alloy on test coupons from your machine.
Heat treatment
Carpenter datasheet, process guidance
- 939W can be hardened with precipitation-hardening heat treatments; the datasheet does not give a schedule, so follow your specification.
- Also known as CM 939 Weldable.
Specifications, equivalent names and how IN939 (939W) compares
Specifications
From the manufacturer datasheet
| Applicable | Not listed on the datasheet |
Equivalent names on LPBF machines
“Similar materials” in the datasheet; for parameter selection only, not machine-maker approvals
| Generic | CM 939 Weldable |
| EOS | Nickel Alloy IN939 |
| SLM Solutions | Ni-Alloy IN939 |
How it compares
Published tensile data, X–Y direction unless noted, one representative condition per alloy. Conditions differ, so use this to shortlist, not to design.
| Alloy | Condition | Yield, MPa | UTS, MPa | Elongation | Choose it for | 10 kg |
|---|---|---|---|---|---|---|
| IN939 (939W) | Tensile data not published on the datasheet | $1,745 | ||||
| Inconel 718 | Solution + age | 1086 | 1425 | 13% | Strength up to 704 °C (1300 °F) | $985 |
| Hastelloy X | Solution + age | 393 | 816 | 41% | Oxidation resistance to 1204 °C (2200 °F) | $1,105 |
Will it run on my printer?
Runs on open-parameter laser powder bed fusion systems. Ask our materials engineer for starting parameters for your machine.
AO MetalA30 · A50 · A100Benchtop to production LPBF with open parameters. Ask our materials engineer for starting parameters.From $59,000 · A30See AO Metal printers →
FarsoonMetal LPBF lineOpen-platform LPBF from compact R&D frames to 16-laser production systems.FS121M · FS191M · FS200M · FS273M · FS301M · FS350M · FS422M · FS621M · FS721M · FS812M · FS1311M · FS1521MQuote on requestSee Farsoon metal printers →Machine names identify compatible equipment only. Additive Plus is not affiliated with these manufacturers, and the powder is not approved by them. Process parameters are tuned per machine.
Store sealed
Keep the container closed, dry and at room temperature until you load the printer.
Sieve
Sieve before loading and every time you reuse powder recovered from a build.
ATO Sieve · quoteLoad and purge
Fill the dispenser, close the chamber and purge with argon or nitrogen.
Print and relieve
Stress-relieve on the plate, then remove parts and supports.
Recover
Collect unfused powder, sieve it and return it to a sealed container.
Delfin Mistral 451 BL D2 — ATEX metal powder vacuum · $7,175Wear a respirator, gloves and eye protection when handling metal powder. Read the safety data sheet before first use.
Printed on AO Metal
Real builds on the LPBF printers we sell, and what teams make from this alloy.
Parts printed on AO Metal printers, which we sell. Alloys, parameters and powder lots differ from part to part; these photos show the process, not parts made from this specific powder lot.
- Hot-gas-path turbine components: vanes, blades, shrouds
- Engine components
Applications as listed by Carpenter Additive for PowderRange 939W.
Ordering, delivery and our promise
10 kg of 15–45 µm powder, sealed, traceable to its Carpenter lot certificate.
The ship date shows next to the Add to Cart button. Shipping cost is calculated at checkout.
Card or PayPal at checkout, an invoice, or a purchase order — choose how you buy next to Add to Cart.
100 kg and more: ask for a volume quote with your alloy, quantity and ship-to.
If the powder is not right, we make it right.
If your lot’s chemistry or particle size falls outside its certificate or this page, or it arrives damaged or wrong, tell us within 14 days of delivery. We replace it or refund you, and we pay for shipping both ways.
Complete the workflow
- ✓ 316L — stronger pitting and chemical resistance than 304 stainless
- ✓ Precision-ground flatness for consistent first-layer adhesion
- ✓ Made to order — choose your speed below: Express 2–3 wks, or Standard 6–8 wks (save ~45%)
- ✓ Conductive / antistatic build — no static build-up around ignition-sensitive powder
- ✓ For stainless, nickel & non-reactive AM powder — reactive metals need the inert unit
- ✓ In US stock · ships in 2 business days · genuine Delfin unit · ATEX docs on request
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 4–8 weeks — built to order · install + training included
- ✓ High tensile, fatigue & creep strength to 1300°F (704°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ COA on request · in US stock, ready to ship
Other alloys in US stock now
Premium-grade LPBF powders, COA on request — add to cart or request a formal quote.
Carpenter Additive · Made in USAHastelloy X Powder for Additive ManufacturingIn stock · ships in ~2 business days$1,105 / 10 kg · $110.50/kg
Carpenter Additive · Made in AustriaAluminum Alloy Powder AlSi10MgIn stock · ships in ~2 business days$815 / 10 kg · $81.50/kg
Carpenter Additive · Made in USAM300 Maraging Steel Powder for Metal 3D PrintingIn stock · ships in ~2 business days$1,210 / 10 kg · $121.00/kg
Amaero · Made in USATi64 Grade 23 (ELI) Titanium Alloy Powder for Metal 3D PrintingIn stock · ships in ~2 business days$2,405 / 10 kg · $240.50/kgCommon questions
Don't see yours? Email [email protected] — NDA on request.
What is PowderRange 939W (IN939) nickel alloy powder?
Can IN939 (939W) be heat treated?
What is the chemistry of IN939 powder?
What are equivalent names for IN939 powder on LPBF machines?
Does IN939 nickel alloy powder come with a certificate of analysis?
How fast does IN939 nickel alloy powder ship, and how can I pay?
Can I reuse unfused IN939 nickel alloy powder?
Place your order, or talk to an engineer first
Order IN939 Nickel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs direct, or talk to materials engineer