Made to order
- US installation commissioning and operator training included
- Validated parameters a parameter set for your first production alloy
Farsoon FS721M LPBF Metal 3D Printer – Up to Eight 1000 W Lasers | 28.3×16.5×16.5 in / 720×420×420 mm
The Farsoon FS721M is a metal LPBF 3D printer with a 28.3×16.5×16.5 in / 720×420×420 mm build envelope, running two or four 500 W lasers, or eight 1000 W lasers.
- ✓ 8×1000 W — top laser configuration
- ✓ 28.3×16.5×16.5 in / 720×420×420 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
What your process engineer actually checks
Laser count scaled to the plate
Two or four 500 W lasers, or eight at 1000 W. Farsoon's calibration keeps part performance uniform across the overlap zones, which is what decides whether an eight-laser plate is usable or just fast.
An applications engineer on the line
Not a ticket queue — engineers who run LPBF in production in-house at AO Metal. Alloy qualification, parameter development, troubleshooting. Sub-4h reply, NDA standard.
The Farsoon FS721M is a long-format production frame: 28.3×16.5×16.5 in / 720×420×420 mm, with two or four 500 W lasers or a eight-laser 1000 W configuration. The shape suits parts that are long — wing structures, rails, shafts — and runs of smaller parts nested down the length of the plate.
Why engineers choose the FS721M
Four things your process engineer will check first.
Up to eight 1000 W lasers
The FS721M-8 configuration puts 8 kW of laser over a 720×420 mm plate. Farsoon's scanning control keeps performance uniform in the multi-laser overlap zones, which is the part that is hard at this laser count.
A 720 mm long envelope
28.3 in in one axis changes what fits in a single build. Long parts stop being an assembly problem, and nested runs of small parts go down the length of the plate instead of stacking.
Conveyor and breakout station built in
An integrated conveyor system moves the build cylinder to a dedicated breakout station for a fully sealed de-powdering process. On a 5000 kg machine, cylinder handling is a real safety question, not a detail.
Continuous feed, monitored recoating
Continuous powder feeding, optimised gas flow, an integrated filter module and real-time recoating monitoring — the set that decides whether a 250-hour build survives.
How we deliver and support it
What happens between the purchase order and your first qualified part.
Scope the cell
We size the configuration against your part mix, then plan power, argon or nitrogen supply and extraction with your facilities team. Machine envelope is 260.2×72.0×98.4 in / 6610×1830×2500 mm; EUR/China: 400V±10%, 3~/N/PE, 50Hz, 32A/40A. The US transformer ships with the machine.
Install and train in the USA
Commissioning and operator training by our US service team. First builds are run together, so your operators hand over parts rather than a checklist.
Parameters, spares, engineer
Validated parameter sets for your alloy, US-held spares, and an applications engineer who has run LPBF in production in-house at AO Metal. Sub-4h reply, NDA standard.
What the FS721M is built for
Large-Format Metal LPBF with up to Eight 1000 W Lasers. The FS721M runs two or four 500 W lasers, or eight 1000 W lasers over a 28.3×16.5×16.5 in / 720×420×420 mm build envelope. Full specifications are in the Specifications tab below.
Powder handling and workflow
Qualified materials
Farsoon lists 316L, TA15 and Ti6Al4V as qualified grades, with AlSi10Mg, IN718, HX and Maraging Steel Grade 300 in process development for the FS721M. Because the platform is open, a grade outside that list is a parameter development project rather than a dead end, and one we can run with you. The alloys we stock are lot-certified and held in the USA.
Typical applications
Where FS721M systems are actually running.
A production case, in numbers
| Aerospace wing rudder with internal lattice | Figure |
|---|---|
| Machine | FS721M-4, quad laser |
| Material | IN718 |
| Part size (each) | 26.2×2.2×9.9 in / 665×55×252 mm |
| Layer thickness | 0.0012 in / 0.03 mm |
| Print time | 250 hours |
Case as published by Farsoon for the FS721M-4.
Not sure the FS721M is the right frame size?
Three Farsoon LPBF platforms either side of it.
Tall rather than longFarsoon FS621MView printer →
Current large formatFarsoon FS1311M-UView printer →
Why source the FS721M through Additive Plus
- US sales, installation, commissioning and operator training by our own service team.
- Applications engineering from a team that runs LPBF in production in-house at AO Metal — parameter development, not a ticket queue.
- Lot-certified metal powders stocked in the USA for the alloys this machine runs.
- Leasing and financing available on capital equipment.
- Print a paid benchmark part in California before you commit to a system.
- Response under 24 hours · 200+ AM systems delivered across 23 countries.
| Brand | Farsoon Technologies |
| External Dimensions (L×W×H) | 260.2×72.0×98.4 in / 6610×1830×2500 mm |
| Build Volume | 720×420×420 mm (28.3×16.5×16.5 in) |
| Net Weight | Approx. 11023 lb / 5000 kg |
| Layer thickness | 0.0008–0.0039 in / 0.02–0.1 mm |
| Scanning Speed | Max. 32.8 ft/s / 10 m/s |
| Laser Type | Dual Lasers, 2×500W, Eight Lasers, 8×1000W, Quad Lasers, 4×500W |
| Scanner | F theta lenses or dynamic focusing system |
| Inert Gas Protection | Argon/Nitrogen |
| Average Inert Gas Consumption in Process | 6-8 L / min |
| Operating system | 64 bit Windows 10 |
| Software | BuildStar, MakeStar® |
| Data File Format | STL |
| Key Software Features | Open machine key parameters, real-time build parameter modification, three-dimensional visualization, diagnostic functions |
| Power Supply | EUR/China: 400V±10%, 3~/N/PE, 50Hz, 32A/40A · US: transformer supplied with the machine |
| Operating Ambient Temperature | 71.6-82.4 °F / 22-28 °C |
| Material | 316L, AlSi10Mg, HX, IN718, TA15, Ti-6Al-4V, 18Ni300 |
| Technology | Metal LPBF |
| Printing Materials | Metal Powders |
Send your STL and we print a paid benchmark part on a Farsoon metal LPBF system in California, with the parameter set and the cost per part written up.
Other products teams run alongside Farsoon FS721M LPBF Metal 3D Printer – Up to Eight 1000 W Lasers | 28.3×16.5×16.5 in / 720×420×420 mm
Compact ceramic SLA printer for small-series production of technical-ceramic parts — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. A peristaltic pump and pressurized tank hold a stable slurry flow for repeatable parts, and the same process scales up to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Built for small series — repeatable ceramic parts, not one-off prototypes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
High-precision industrial SLA. Marble frame. Vacuum recoating. Built for fine-detail parts with a longer reach — extended dental and jewelry work, small engineering prototypes and casting patterns — at industrial accuracy.
- ✓ 24×14×14 in / 600×350×350 mm build chamber — fine detail with longer reach
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 0.0005 mm vertical resolution
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
The Farsoon FS200M-2 is a metal LPBF 3D printer with a 16.7×9.1×11.8 in / 425×230×300 mm build envelope, running two 500 W fiber lasers.
- ✓ 2×500 W — dual fiber lasers
- ✓ 16.7×9.1×11.8 in / 425×230×300 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Made to order
· Built to order
Industrial laser SLA ceramic 3D printer built for serial production — a 12.6×12.6×7.9 in / 320×320×200 mm build, one- or two-laser configuration, and CERIA process automation. Runs alumina, zirconia, silicon nitride, AlN, HA and more, with the full print → debind → sinter workflow supported by Additive Plus.
- 320×320×200 mm build — UV laser 300 mW, ~60 µm spot, one or two lasers.
- 7+ technical ceramics — alumina, zirconia, Si₃N₄, AlN, hydroxyapatite, TCP, cordierite.
- Lead time: configured to order — install, training & debind/sinter support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Open parameters — qualify new ceramics & formulations, not just vendor recipes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
Compact high-precision industrial SLA. Marble frame. Vacuum recoating. Built for fine-detail parts — dental models, jewelry masters, small engineering prototypes and casting patterns — at industrial accuracy.
- ✓ 12×14×14 in / 300×350×350 mm build chamber — fine detail without a large footprint
- ✓ Solid-state 355 nm Nd:YVO4 laser · 0.075–0.8 mm variable beam · 0.0005 mm vertical resolution
- ✓ Full-marble machine frame — thermal stability for ±0.1 mm part accuracy
- ✓ Lead time: 2–3 months — on-site install, calibration & operator training included
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
The Farsoon FS1311M-U is a large-format LPBF metal 3D printer for high-throughput production — a 1310 × 1310 × 1650 mm build with sixteen 500 W or 1000 W fiber lasers, reaching up to 1,440 cm³/h in Ti-6Al-4V.
- ✓ 1310 × 1310 × 1650 mm build · 16 × 500/1000 W fiber lasers
- ✓ Up to 1,440 cm³/h in Ti-6Al-4V · titanium & nickel superalloys
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Request a build slot
Large-format pellet extrusion 3D printer — 31×24×31 in / 800×600×800 mm, raw polymer granules, 0.4–2 mm nozzle selection. Optional 450°C nozzle for PEEK/PEKK/ULTEM. Material cost 5–10× lower than equivalent filament.
- ✓ Pellet feedstock — 5–10× lower material cost vs. filament at the same polymer
- ✓ Optional 450°C nozzle — PEEK, PEKK, ULTEM at 800×600×800 mm scale
- ✓ Lead time: 2–3 months — configured to order, installed and trained on-site
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which alloys are qualified for the Farsoon FS721M?
Is an eight-laser machine actually usable, or just fast on paper?
Is the FS721M an open system, or are we locked to vendor parameters?
What part size does the FS721M handle, and what fits in one build?
What does installation and training in the USA involve for the FS721M?
How does the FS721M compare with the other Farsoon metal platforms?
Can we test the FS721M before committing to a purchase?
Place your order, or talk to an engineer first
Order Farsoon FS721M LPBF Metal 3D Printer – Up to Eight 1000 W Lasers | 28.3×16.5×16.5 in / 720×420×420 mm direct, or talk to materials engineer