Made to order
- US installation commissioning and operator training included
- Validated parameters a parameter set for your first production alloy
Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm
The Farsoon FS301M is a metal LPBF 3D printer with a 12.0×12.0×16.1 in / 305×305×410 mm build envelope, running one or two 500 W lasers, each covering the full build area.
- ✓ 12.0×12.0×16.1 in — build cylinder
- ✓ 12.0×12.0×16.1 in / 305×305×410 mm build envelope
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
What your process engineer actually checks
Full-coverage dual lasers
Each of the two 500 W lasers reaches the entire build area, so a tall single part gets both of them and a nested plate gets intelligent distribution. No fixed seam your geometry has to dodge.
An applications engineer on the line
Not a ticket queue — engineers who run LPBF in production in-house at AO Metal. Alloy qualification, parameter development, troubleshooting. Sub-4h reply, NDA standard.
The Farsoon FS301M pairs a 12.0×12.0×16.1 in / 305×305×410 mm build cylinder with a dual-laser scanning strategy where each laser covers the entire build area. One large part or a plate of small ones — the machine distributes the work rather than splitting the plate down the middle.
Why engineers choose the FS301M
Four things your process engineer will check first.
Each laser covers the whole plate
Full-coverage dual-laser scanning with calibration algorithms. A tall single part gets both lasers, and a nested plate gets intelligent distribution — not a fixed seam at the centre that your part has to avoid.
Sealed powder handling, one shared container
An integrated powder-loading dock keeps material under inert atmosphere, and one container covers loading, unloading and sieving. Less exposure for the operator and less transfer between stations.
3.61 m² with front and rear access only
The FS301M needs no side clearance, so machines pack tighter than the footprint alone suggests. The integrated filter runs up to 1500 hours between changes.
Pre-heated plate, electric levelling, vision system
Process control details that decide repeatability: a heated base plate, electric levelling and a vision system, with real-time monitoring and an airtight chamber.
How we deliver and support it
What happens between the purchase order and your first qualified part.
Scope the cell
We size the configuration against your part mix, then plan power, argon or nitrogen supply and extraction with your facilities team. Machine envelope is 92.9×60.2×84.6 in / 2360×1530×2150 mm; EUR/China: 400V±10%, 3~/N/PE, 50Hz, 15A. The US transformer ships with the machine.
Install and train in the USA
Commissioning and operator training by our US service team. First builds are run together, so your operators hand over parts rather than a checklist.
Parameters, spares, engineer
Validated parameter sets for your alloy, US-held spares, and an applications engineer who has run LPBF in production in-house at AO Metal. Sub-4h reply, NDA standard.
What the FS301M is built for
Dual-Laser Metal LPBF with Full-Coverage Scanning. The FS301M runs one or two 500 W lasers, each covering the full build area over a 12.0×12.0×16.1 in / 305×305×410 mm build envelope. Full specifications are in the Specifications tab below.
Powder handling and workflow
Qualified materials
Farsoon lists 316L, 17-4PH, 420, HX, IN718, AlSi10Mg, TA15 and Ti6Al4V, with HAYNES 230 in process development for the FS301M. Because the platform is open, a grade outside that list is a parameter development project rather than a dead end, and one we can run with you. The alloys we stock are lot-certified and held in the USA.
Typical applications
Where FS301M systems are actually running.
A production case, in numbers
| Aluminium gearbox mount | Figure |
|---|---|
| Machine | FS301M-2, dual laser |
| Material | Aluminium |
| Part size | 10.8×9.6×7.5 in / 275×245×191 mm |
| Build time | 43 hours |
| Finished mass | 1.119 kg |
Farsoon publishes this part as a gearbox mount for a Siemens-sponsored Formula race car, designed in Siemens NX. Post-processing is heat treatment, wire cutting and sand blasting.
Not sure the FS301M is the right frame size?
Three Farsoon LPBF platforms either side of it.
More lasersFarsoon FS350MView printer →
Continuous productionFarsoon FS422M CAMSView printer →
Why source the FS301M through Additive Plus
- US sales, installation, commissioning and operator training by our own service team.
- Applications engineering from a team that runs LPBF in production in-house at AO Metal — parameter development, not a ticket queue.
- Lot-certified metal powders stocked in the USA for the alloys this machine runs.
- Leasing and financing available on capital equipment.
- Print a paid benchmark part in California before you commit to a system.
- Response under 24 hours · 200+ AM systems delivered across 23 countries.
| Brand | Farsoon Technologies |
| External Dimensions (L×W×H) | 92.9×60.2×84.6 in / 2360×1530×2150 mm |
| Build Volume | 305×305×410 mm (12.0×12.0×16.1 in) |
| Net Weight | 6173 lb / 2800 kg |
| Layer thickness | 0.0008–0.0039 in / 0.02–0.1 mm |
| Scanning Speed | Max. 49.9 ft/s / 15.2 m/s |
| Laser Type | Dual Lasers, 2×500W, Single Laser, 1×500W |
| Scanner | Dynamic focusing system |
| Inert Gas Protection | Argon/Nitrogen |
| Average Inert Gas Consumption in Process | 3 - 5 L/min |
| Operating system | 64 bit Windows 10 |
| Software | BuildStar, MakeStar® |
| Data File Format | STL |
| Key Software Features | Open machine key parameters, real-time build parameter modification, three-dimensional visualization, diagnostic functions |
| Power Supply | EUR/China: 400V±10%, 3~/N/PE, 50Hz, 15A · US: transformer supplied with the machine |
| Operating Ambient Temperature | 71.6-82.4 °F / 22-28 °C |
| Material | 17-4PH, 316L, 420, AlSi10Mg, HAYNES 230, HX, IN718, TA15, Ti-6Al-4V |
| Technology | Metal LPBF |
| Printing Materials | Metal Powders |
Send your STL and we print a paid benchmark part on a Farsoon metal LPBF system in California, with the parameter set and the cost per part written up.
Other products teams run alongside Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm
The Farsoon HT601P-2 is a large-format SLS 3D printer built for lower cost per part — a 600 × 600 × 600 mm cubic build, dual 100 W CO₂ lasers reaching up to 12 kg of finished parts per day, and a 220 °C chamber for engineering polymers.
- ✓ Cubic 600 mm build · dual CO₂ for lower cost per part
- ✓ Open platform — PA6, PBT, PA11, PA12, TPU
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Lead time: configured to order — request a build slot. US installation and operator training included.
Made to order
· 2–3 months from order placement. Need it sooner? Talk to a specialist.
The InssTek MX-Fab is an all-in-one 5-axis DED metal 3D printer with a 31×39×28 in / 800×1000×700 mm work envelope — a 1,000 W (up to 2,000 W) ytterbium fiber laser, DMT closed-loop melt-pool control, and up to six powder feeders for multi-material and functionally graded parts.
- ✔ 5-axis DED with real-time DMT melt-pool feedback — dense, near-net-shape metal
- ✔ 30+ qualified alloys: Ti, Ni superalloys, stainless & tool steel, CoCr, Cu — multi-material in one build
- ✔ Fabrication, cladding, and repair on one platform
- ✔ Lead time: configured to order — request a quote for delivery & installation
Made to order
· Quote on request
Large-format, high-temperature fiber-laser SLS system with a metre-scale 39.4×19.7×17.7 in / 1000×500×450 mm build. Two to four 300 W fiber lasers and a 220 °C chamber run high-performance and glass-filled polymers at production scale, with fully open parameters and a modular build-station architecture. Sold, installed and supported in the US by Additive Plus.
- Metre-scale build — 1000×500×450 mm for large parts and high-nest batches.
- 2–4 fiber lasers · 220 °C — high-performance, glass-filled & TPU polymers.
- Lead time: configured to order — US install, training & validated profiles from California.
Made to order
· Lead time: configured to order — request a build slot. US installation of module and build station, training and process support included from California.
The Farsoon Flight HT601P-4 is a large-format quad-fiber SLS 3D printer — a 600 × 600 × 600 mm cubic build, four 300 W fiber lasers (1,200 W total) scanning to 20 m/s, and a 220 °C chamber for engineering polymers.
- ✓ Cubic 600 mm build · quad 300 W fiber lasers for speed and detail
- ✓ Efficiency and Quality scan modes · adjustable laser spot size
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Lead time: configured to order — request a build slot. US installation and operator training included.
The Farsoon FS812M-U is a tall large-format LPBF metal 3D printer with a compact footprint — an 810 × 810 × 1700 mm build with eight to ten fiber lasers (500 W or 1000 W), in a frame with 41% less floor space than the prior generation.
- ✓ 810 × 810 × 1700 mm build · 8–10 fiber lasers · 41% smaller footprint
- ✓ Titanium & nickel superalloys · multi-layer gas flow field
- ✓ Lead time: configured to order — US install, training and support
Made to order
· Request a build slot
Industrial FFF. Klipper high-speed. Closed-loop servos. Built for functional prototypes, jigs, fixtures and small production runs in standard engineering filaments — with the repeatability hobby machines can't hold.
- ✓ 11.81×11.81×15.75 in / 300×300×400 mm build volume — industrial linear guides on XY
- ✓ Klipper high-speed to 350 mm/s · 70 W Volcano hot end · heated bed to 120 °C
- ✓ Open 1.75 mm ecosystem — PLA, ABS, PETG, TPU from any supplier · BMG dual-drive
- ✓ Ships configured & tested — onboarding and demo units available
Made to order
· 2–3 months. Need it sooner? Talk to a specialist.
Compact ceramic SLA printer for small-series production of technical-ceramic parts — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. A peristaltic pump and pressurized tank hold a stable slurry flow for repeatable parts, and the same process scales up to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Built for small series — repeatable ceramic parts, not one-off prototypes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which alloys are qualified for the Farsoon FS301M?
What does full-coverage dual-laser scanning mean on the FS301M?
Is the FS301M an open system, or are we locked to vendor parameters?
What part size does the FS301M handle, and what fits in one build?
What does installation and training in the USA involve for the FS301M?
How does the FS301M compare with the other Farsoon metal platforms?
Can we test the FS301M before committing to a purchase?
Place your order, or talk to an engineer first
Order Farsoon FS301M LPBF Metal 3D Printer – Full-Coverage Dual Lasers | 12.0×12.0×16.1 in / 305×305×410 mm direct, or talk to materials engineer