In stock
Zetamix Black Zirconia Filament 1,75mm
- ✔ High toughness and wear resistance with a striking black finish
- ✔ Print → debind → sinter to dense ceramic on a standard FFF printer
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
$550
Zetamix Black Zirconia lets you 3D-print dense technical zirconia (3Y-TZP) with a deep, through-body black finish on a standard FFF printer, then debind and sinter to a tough, wear-resistant ceramic part — the same print → debind → sinter workflow we run in-house on our 3DCeram M.A.T.
Why engineers choose Zetamix Black Zirconia filament
Yttria-stabilized zirconia (3Y-TZP) coloured black all the way through — zirconia strength with a finished black surface.
3Y-TZP resists chipping and impact where alumina and other technical ceramics crack — for parts that take load and abuse.
Bending strength of 400–1000 MPa after sintering, at 98–99% of theoretical density — the mechanical performance of technical zirconia.
The colour runs through the part, not a coating. It stays black through matte, brushed or polished finishing — no plating, no paint.
Hard, chemically stable surface for guides, wear parts and structural components that run in abrasive or aggressive environments.
Black zirconia material properties after sintering
- Composition: yttria-stabilized zirconia (3Y-TZP), coloured black through-body
- Density after sintering: 98–99% of theoretical
- Bending strength: 400–1000 MPa
- Fracture toughness: highest of the common technical ceramics
- Colour: deep black, consistent throughout
- Sintering: 1475 °C, 2 h hold, air atmosphere
- Linear shrinkage: ~21.5% (scale the model by 127.4%)
- Filament: 1.75 mm · 500 g spool
Full specifications are listed in the Specifications tab. Mechanical values are process-dependent — final properties vary with print, debind and sinter parameters.
From spool to dense black ceramic part
Three stages — the same workflow we run in-house.
Design & scale
Scale the model by 127.4% for sintering shrinkage. Minimum wall 1 mm, minimum part 6 mm cube, minimum vertical hole 0.6 mm, pins ≥2.3 mm.
Print on FFF
Print the green part on any standard FFF machine with a grooved drive gear and flexible build plate. 100% fan, 1 mm retraction at 20 mm/s.
Debind & sinter
Acetone debind (6 h, 40 °C), thermal debind to 500 °C, then sinter to 1475 °C in air to a dense black zirconia part. No furnace? We run this for you.
Where black zirconia is used
Designers and engineers print black zirconia when they need zirconia strength and a finished black surface in the same part.
See real builds in our Zetamix case studies →
No sintering furnace or debinding station? Talk to our team — we’ll help you get set up. Get in touch →
See Zetamix Black Zirconia in action
Watch how Zetamix ceramic and metal filaments go from spool to dense, sintered part — the same FFF print → debind → sinter workflow we run in-house.
Choose your Zetamix material
Every Zetamix filament prints on a standard FFF 3D printer — we print and validate them in-house on our 3DCeram M.A.T. system — then debind and sinter to a dense ceramic or metal part. The highlighted row is the material on this page; compare the range below:
| Material | Type | Stands out for | Best for | From |
|---|---|---|---|---|
| Alumina | Technical ceramic | Electrical insulation, ~1550°C | Insulators, high-temp tooling | $495 |
| White Zirconia | Technical ceramic | Toughness & flexural strength | Wear & structural parts | $485 |
| Black Zirconia | Technical ceramic | Zirconia strength, black finish | Aesthetic + technical parts | $550 |
| Silicon Carbide | Technical ceramic | Extreme hardness & thermal | Abrasive / high-temp parts | $550 |
| Porcelain | Ceramic (art) | Glazeable, classic finish | Art, tableware, decorative | $225 |
| 316L | Stainless steel | Corrosion resistance, ductile | Functional metal parts | $420 |
| 17-4 PH | Stainless steel | High strength, hardenable | Tooling & functional parts | $420 |
| H13 | Tool steel | Hot hardness & wear | Dies, inserts, tooling | $420 |
| TiO2 | Specialty ceramic | Specialty technical ceramic | Niche functional parts | $550 |
| Brand | Zetamix by Nanoe |
| Printing Materials | Ceramic Filaments |
| Technology | FFF |
| Material | Zirconia (ZrO2) |
| Application | Composite Tooling, Engineering, Jigs & Fixtures, Manufacturing |
Other products teams run alongside Zetamix Black Zirconia Filament 1,75mm
High-temp. Corrosion-proof. Non-magnetic. Genuine Carpenter PowderRange® 625 (Inconel® 625) nickel superalloy for LPBF, EBM & DED metal 3D printing.
- ✓ Strength & corrosion resistance to 2000°F (1093°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on every lot · in US stock, ready to ship
In stock
· In US stock · ready to ship
IPA-free cleaning liquid that removes uncured resin from SLA and DLP 3D-printed parts before UV curing — non-flammable at ambient temperature and water-rinseable.
- ✓ Holds >15% dissolved resin vs IPA under 10% — fewer changeouts
- ✓ IPA-free, high flash point (75 °C), water-rinseable
- ✓ 18 kg · available to order, lead time confirmed after you order
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
General purpose translucent photopolymer for the Nexa3D NXE 400 and NXE 400 Pro. Combines 30–60 MPa ultimate tensile strength, 84–88 D Shore hardness and 59–61 °C HDT at 0.45 MPa with low shrinkage, high accuracy and fast LSPc print speed. The translucent finish makes it the practical choice for air ducts, manifolds and fluid-flow models where you need to see inside the part, and it holds up in snap-fit and functional end-use work. Water absorption is 0.4% to ASTM D570. Supplied to order in 5 kg (12 lb) jerricans.
Made to order
· Contact for lead time
In stock
· 1–2 Business Days
Zetasinter Porcelain is an electric oven for firing printed porcelain pieces.
- ✔ 54 litres — fire multiple pieces in a single run
- ✔ Fully configurable temperature programmer with several heating modes
- ✔ Runs on 230 V at 4.5 kW, light enough at 95 kg for a normal workshop
Freight and installation requirements confirmed with you before the order is placed.
Made to order
· Ships from California · timeline confirmed at quotation
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What makes black zirconia different from white zirconia?
What finishing options are available for black zirconia?
What applications is black zirconia best suited for?
How does the strength compare to other ceramics?
Does the black color affect the material properties?
What design limitations should I consider?
Can I achieve different shades of black?
How long does the complete process take?
What safety precautions are necessary?
What's the shelf life of the filament?
Place your order, or talk to an engineer first
Order Zetamix Black Zirconia Filament 1,75mm direct, or talk to materials engineer