3D CERAM ceramic sla 3d printers
Extended line of proprietary ceramic formulations
Unique hybrid stereolithography printing process
Ceramic parts are very resistant and exceptional physicochemical properties
Industries
Aerospace
Foundry Cores
Biomedical
Industry
Research
C101 EASY LAB
This printer is user friendly, has open parameters, stereolithography laser, free link support technology, a pressure tank (1,5 liter) feeding to provide the material quantity required for an optimized run 100*100*150, peristaltic pump for flowrate control to manage quantity of printed ceramic slurry, accessible for persons with reduced mobility, easy scale up to C3601 (600 x 600 x 300 mm).
С101 EASY FAB
- Installation of post-processing models – allows you to easily remove unpolymerized paste.
- Furnaces for removing photopolymer (in oxygen and nitrogen environment) and sintering of parts (in a professional environment).
C101 EASY Hybrid
Print 2 materials simultaneously on the same layer.
This printer is user friendly, has open parameters, stereolithography laser, free link support technology, a pressure tank (1,5 liter) feeding to provide the material quantity required for an optimized run 100*100*150, peristaltic pump for flowrate control to manage quantity of printed ceramic slurry, accessible for persons with reduced mobility, easy scale up to C3601 (600 x 600 x 300 mm).
C900 flex
- 3 sizes of building platform: 100 x 300 mm, 200 x 300 mm and 300 x 300 mm
- Free link technology
- SAM (Small Amount of Material) option : launch a fast printing run with only 100 mL of slurry
C900 HYBRID
- The deposit of the second material can be adjusted according to your needs and specifications.
- Inside the system, several type of dispenser systems are possible up to 3 systems : from needle valve to micro dispensing system.
- Hybrid functions integrated in CPS software (one software to control printer and hybrid)
C3601 ULTIMATE
The optimal solution for mass production. The 3601 is the largest industrial printer in the 3DCeram product line with a build area of 600x600x300mm. The Ceramaker 3D printer allows you to produce products with high surface quality, the roughness of which does not exceed 2 microns.
Mechanical processing can be carried out at any intermediate stage. The parameter setting module has an open architecture, which makes it possible to use different materials. The Ceramaker 3D printer is supplied with modules of different sizes. This makes it possible to optimize the consumption of paste during printing. Benefits Stereolithography (laser) Technology without support. Reduced production cost of 1 part Reduced cleaning time.
Extended line of proprietary ceramic formulations
Are you ready to learn more about Ceramic printers?
Arrange a consultation with our experts.
Reach Us by Phone
Email Us
Send us an email any time.
We strive to respond to all inquiries within 2-8 hours.
Our 3D printing Lab is located in Santa Fe Springs, CA.
Contact us schedule a visit.
Get in Touch via Social Media
Follow us, send us a message, and stay updated with the latest in 3D printing technology.
